Hi Thomas,
Check your /etc/zaptel.conf and /etc/asterisk/zapata.conf. Probably you have not configured your channels at zapata.conf.
Daniel
Thomas Schroeter wrote:
Hi,
I use asterisk with a Digium E1 (wct1xxp). On my old server, everything went fine, but after having built the card to a new one, I only have problems:
-- Executing Dial("[EMAIL PROTECTED]:18308]/1", "Zap/1/853") in new stack
May 15 14:10:37 NOTICE[15376]: app_dial.c:554 dial_exec: Unable to create channel of type 'Zap'
== Everyone is busy at this time
ztcfg shows no errors.
So where's my problem?!?
Regards, thomas
PS:
zapata.conf: [...] switchtype = euroisdn signalling = pri_cpe group = 1 channel => 1-15,17-31
zaptel.conf: span=1,0,0,ccs,hdb3,crc4 #,yellow bchan=1-15,17-31 dchan=16
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
