I've been lurking on the list for quite a while now, and I hadn't seen much from people using FreeBSD, so I figured I'd post something.
Yes, the driver in the ports tree for the digium card works! I'd heard reports that it crashes the box/etc, but I have yet to encounter that. I've had all the fun I can stand making it answer the phone, dial numbers/etc. The makefile for the fxo_test program needs a bit of work, but its pretty easy to do. I added some other features to it, so at some point I may make it a bit more interesting :) Unfortunately that particular driver only seems to support the X100/X101 cards, so the larger cards will prolly have to wait, but it is a start in the right direction. Building asterisk is a PITA due to the lack of anyone fixing pwlib, lots of asterisk's dependencies depend on pwlib. Someone should prolly fix this as there have been patches out for quite a while now. If I get bored enough, I'll do it myself :) I got asterisk to build, run fine, run the demo, and do a couple other things. My X100P card works good, it answers calls, dials calls, sounds good/etc. I ran into some trouble when working on un-natting my setup, and I got a buncha weird messages from chan_sip.c about "address family not supported by protocol family". Given that I think we're talking about TCP+UDP, there's something up there. I'm gonna rebuild and see what happens tomorrow. My Setup: OS: 5.2.1-RELEASE (installed about a week ago) HW: AMD 1.4Ghz, 512MB ram FXO: X100P Location: San Francisco, CA If anyone is interested in my story, lemme know :) I'll try to help, but I can't promise anything. plz reply off list thx _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
