I am getting a similar problem with a TDM400P with 4 FXO ports, Module 1 not working properly, IE not picking up the calls at all.
I have 3 TDM400P cards, 1 loaded with 4 FXO ports, 2 loaded with 4 FXS ports. Does anyone know if this problem with port 1 is only with the FXO modules or if it's also with FXS modules... I'm wondering if I should be moving ports around on the card not to use FXO ports on any port#1, even though it would be pretty confusing when connecting lines on the cards. Also could this problem with port #1 be associated with the Power Alarm on module 1, resetting? Thank you! Sylvain Gagnon [EMAIL PROTECTED] > There is a known problem with the first port on the TDM400P. For me, the > problem resulted in randomly dropped calls on the FXO port, which was > plugged into position 1. Since you only have two daughterboards, try > using positions 2-3-4 and don't use position 1, and see of that solves > your problem. > > Bruce Komito > High Sierra Networks, Inc. > www.servers-r-us.com > (775) 284-5800 ext 115 > > > On Wed, 19 May 2004, David Creemer wrote: > >> Hi- >> >> I'm totally stumped configuring my TDM400P with one FXS and one FXO >> module. Before I got the FXO module, I used to have an X101P, and >> everything was working very well. Now * doesn't seem to recognize the >> FXO channel. I've searched the wiki and the list archives. Stock Debian >> 3.0 stable installation. Any advice? Thanks. >> >> -- David >> >> >> Here's my configuration: >> >> modprobe zaptel >> modprobe wcfxs >> >> report no errors. >> >> box:/etc/asterisk# ztcfg -vv >> >> Zaptel Configuration >> ====================== >> >> >> Channel map: >> >> Channel 01: FXO Kewlstart (Default) (Slaves: 01) >> Channel 02: FXS Kewlstart (Default) (Slaves: 02) >> >> 2 channels configured. >> >> --------------- >> >> So it looks like things are OK so far. Here's the relevant portion of >> my zaptel.conf: >> >> defaultzone=us >> # load FXO X100P channel 1, kewlstart signalling >> # turned off, card removed >> #fxsks=1 >> # load FXS TDM400P channel 1, kewlstart signalling >> fxoks=1 >> # load FXO TDM400P channel 2, kewlstart signalling >> fxsks=2 >> >> >> And here's what dmesg reports: >> >> Zapata Telephony Interface Registered on major 196 >> PCI: Found IRQ 12 for device 00:09.0 >> Freshmaker version: 63 >> Freshmaker passed register test >> Module 0: Installed -- AUTO FXS >> Module 1: Not installed >> Module 2: Installed -- AUTO FXO >> Module 3: Not installed >> Found a Wildcard TDM: Wildcard TDM400P REV E/F (4 modules) >> Registered tone zone 0 (United States / North America) >> >> ----------------------------------------------- >> >> the relevant portions of my zapata.conf are: >> >> [channels] >> language=en >> usecallerid=yes >> hidecallerid=no >> callwaiting=yes >> usecallingpres=yes >> callwaitingcallerid=yes >> callreturn=yes >> echocancel=yes >> echocancelwhenbridged=yes >> busydetect=yes >> callprogress=yes >> >> ; interfaces for internal analog phones >> signalling=fxo_ks >> threewaycalling=yes >> transfer=yes >> group=1 >> context=from-internal >> callerid="Creemer" <01> >> channel => 1 >> mailbox=01 >> >> ; interfaces to the external PSTN line >> signalling=fxs_ks >> context=from-pstn >> group=2 >> channel => 2 >> >> ----------------------------------------------- >> >> starting asterisk gives: >> [chan_zap.so] => (Zapata Telephony w/PRI) >> == Parsing '/etc/asterisk/zapata.conf': Found >> May 19 10:42:20 DEBUG[1024]: chan_zap.c:1077 update_conf: Updated >> conferencing on 1, with 0 conference users >> -- Registered channel 1, FXO Kewlstart signalling >> May 19 10:42:20 WARNING[1024]: chan_zap.c:665 zt_open: Unable to >> specify channel 2: No such device >> May 19 10:42:20 ERROR[1024]: chan_zap.c:5340 mkintf: Unable to open >> channel 2: No such device >> here = 0, tmp->channel = 2, channel = 2 >> May 19 10:42:20 ERROR[1024]: chan_zap.c:7376 setup_zap: Unable to >> register channel '2' >> May 19 10:42:20 WARNING[1024]: loader.c:313 ast_load_resource: >> chan_zap.so: load_module failed, returning -1 >> == Unregistered channel type 'Tor' >> == Unregistered channel type 'Zap' >> -- Unregistered channel 1 >> -- Unregistered channel 2 >> May 19 10:42:20 WARNING[1024]: loader.c:408 load_modules: Loading >> module chan_zap.so failed! >> >> _______________________________________________ >> Asterisk-Users mailing list >> [EMAIL PROTECTED] >> http://lists.digium.com/mailman/listinfo/asterisk-users >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users