I think your veodr is bs. The ISDN E1 PRI specs is always A-Law. I'm not
sure if that applies if you're using E1 CAS, e.g. R2 or MF. If in doubt,
set your E100P to EuroISDN PRI mode and get the vendor to set the
gateway to the same mode as well.
Bill Carroll wrote:
I've got a * box with a TDM40B and an E100P. The E1 is connected to a Shout900 VoIP
gateway from net.com. My question is, when I place a call from an analog phone and
that call is routed over the E1, what encoding is used? And do I have any control over
that? I'm obviously not an expert here, but the Shout900 vendor is claiming that some
difficulties that we are having with integration are due to the use of ADPCM encoding
on the E1 and he is saying we should be using A-Law or Mu-Law. I can't find anywhere
that ADPCM is referenced as a codec that would be used in my situation or how I would
set it if it was an option.
Thanks for any help.
Bill Carroll
The OakHill Group
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
