|
All, I have an issue with IAX that I can’t comprehend. Approximately every eight minutes my
servers go unreachable. They stay
unreachable for exactly 10ms. I
have two servers running IAX and it happens on both servers simultaneously. I have searched the archives and see
similar issues, but not the exact same one. I am on the current CVS stable version of
*. Also, during IAX calls, every couple of minutes there is
about a second of silence. Silence
suppression is turned off on all phones (Grandstream
BT101s). This issue does not occur
during SIP calls. I do have a similar registration problem with SIP. There are two phones on one site that go
reachable/unreachable. (See extension 6666 in the sample below. This is a B101 that is registered to my
server, but it happens to be at the same location as the second * server.) If anyone can point me in the right direction for troubleshooting,
I would appreciate it. I am pasting
example error messages that I receive below. TIA, John CLI Output: May 23 12:50:05 NOTICE[7176]:
chan_iax2.c:5616 iax2_poke_noanswer: Peer ' May 23 12:50:15 NOTICE[7176]:
chan_iax2.c:5213 socket_read: Peer ' May 23 12:58:19 NOTICE[7176]:
chan_iax2.c:5616 iax2_poke_noanswer: Peer ' May 23 12:58:29 NOTICE[7176]:
chan_iax2.c:5213 socket_read: Peer ' May 23 13:06:07 NOTICE[5126]:
chan_sip.c:6901 sip_poke_noanswer: Peer '6666' is now
UNREACHABLE! May 23 13:06:34 NOTICE[7176]:
chan_iax2.c:5616 iax2_poke_noanswer: Peer ' May 23 13:06:44 NOTICE[7176]:
chan_iax2.c:5213 socket_read: Peer ' May 23 13:14:49 NOTICE[7176]:
chan_iax2.c:5616 iax2_poke_noanswer: Peer ' May 23 13:14:59 NOTICE[7176]:
chan_iax2.c:5213 socket_read: Peer ' May 23 13:17:56 NOTICE[5126]:
chan_sip.c:5860 handle_response: Peer '6666' is now
REACHABLE! Iax.conf: [general] ;port=5036 ;I commented this out because I
discovered it is hard coded anyway. bindaddr=10.20.30.10 amaflags=default accountcode=default bandwidth=low disallow=all allow=gsm jitterbuffer=no ;dropcount=3 ;maxjitterbuffer=500 ;maxexcessbuffer=100 ;trunkfreq=20 tos=lowdelay authdebug=no register
=> username:[EMAIL PROTECTED] ;these are real values that I changed
for security reasons [ type =
friend context =
local callerid
= auth =
plaintext secret = password ;inkeys
= ;outkey
= host =
dynamic ;defaultip
= ;accountcode
= qualify =
yes ;mailbox = trunk =
yes |
- Re: [Asterisk-Users] IAX2 REACHABLE/UNREACHABLE John Blackman
