CAN SOMEONE PLEASE POST THIS CONVERT IN A HOWTO OR FAQ This works!!!! Small twist I had to use signed loads so it was P0S353 is the OS79XX.txt and the SIPDEFAULT.cnf has the current load that I wanted to go to.
Every other Doc or person that replied there howto never worked it may have been that I was on 5.0(1.1) SCCP which is a signed load but it never gave me the sign load error in tftp or on the phone before. Thanks -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Shaun Ewing Sent: Tuesday, May 25, 2004 5:51 PM To: [EMAIL PROTECTED] Subject: RE: [Asterisk-Users] 79XX converting > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of lists > Sent: Wednesday, 26 May 2004 7:38 AM > To: [EMAIL PROTECTED] > Subject: RE: [Asterisk-Users] 79XX converting > > OK I just tried that with the pos030201 load still no go > > Should I try going up on the MGCP then down to pos30201 and > work my way up? Try P0S30203 if you have it. I've found that when converting these phones to SIP, I have to load P0S30203 (which I put in OS79XX.txt). I then place the newer version in SIPDefault.cnf (eg: image_version: "P0S3-06-2-00"). That way new SIP phones will go to P0S30203 first to get the extended filename support and then to P0S3-06-2-00. -Shaun _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
