> > On Tue, 25 May 2004, Bartosz Jozwiak wrote: > > > > >Hello, > > > > > >I have just received Adtran TSU 600 with 24 FXS ports. > > >I have installed sucessfuly T100P card. > > > > Sucessfully? > > Did you load the module for the card? > > Yes > > > What does 'ztcfg -v' show? > > ast05:~# ztcfg -vvv > > Zaptel Configuration > ====================== > > SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1) > > Channel map: > > Channel 01: FXO Kewlstart (Default) (Slaves: 01) > Channel 02: FXO Kewlstart (Default) (Slaves: 02) > Channel 03: FXO Kewlstart (Default) (Slaves: 03) > Channel 04: FXO Kewlstart (Default) (Slaves: 04) > Channel 05: FXO Kewlstart (Default) (Slaves: 05) > Channel 06: FXO Kewlstart (Default) (Slaves: 06) > Channel 07: FXO Kewlstart (Default) (Slaves: 07) > Channel 08: FXO Kewlstart (Default) (Slaves: 08) > Channel 09: FXO Kewlstart (Default) (Slaves: 09) > Channel 10: FXO Kewlstart (Default) (Slaves: 10) > Channel 11: FXO Kewlstart (Default) (Slaves: 11) > Channel 12: FXO Kewlstart (Default) (Slaves: 12) > Channel 13: FXO Kewlstart (Default) (Slaves: 13) > Channel 14: FXO Kewlstart (Default) (Slaves: 14) > Channel 15: FXO Kewlstart (Default) (Slaves: 15) > Channel 16: FXO Kewlstart (Default) (Slaves: 16) > Channel 17: FXO Kewlstart (Default) (Slaves: 17) > Channel 18: FXO Kewlstart (Default) (Slaves: 18) > Channel 19: FXO Kewlstart (Default) (Slaves: 19) > Channel 20: FXO Kewlstart (Default) (Slaves: 20) > Channel 21: FXO Kewlstart (Default) (Slaves: 21) > Channel 22: FXO Kewlstart (Default) (Slaves: 22) > Channel 23: FXO Kewlstart (Default) (Slaves: 23) > Channel 24: FXO Kewlstart (Default) (Slaves: 24) > > 24 channels configured. > > > > Is asterisk running? Does asterisk see the ports? (zap show channels) > > This is the following: > *CLI> zap show channels > Chan Extension Context Language MusicOnHold > 1 default default > 2 default default > 3 default > 4 default > 5 default > 6 default > 7 default > 8 default > 9 default > 10 default > 11 default > 12 default > 13 default > 14 default > 15 default > 16 default > 17 default > 18 default > 19 default > 20 default > 21 default > 22 default > 23 default > 24 default > > > > > > > >Adtran is connected to t100p with crossover T1 cable. > > >On T100P card I have a green light and on Adtran I do not get any > > >errors or alarms. > > >But I do not get dialtone on FXS ports. > > > > > >Adtran is configured: For Network Timing, fxs ports ore fxs_ls on Adtran. > > > > > >In zaptel.conf: > > <snip> > > > >
Still having the same problem. I was palying around with span but it did not help. I have no idea anymore what could be wrong. Can some body be so kind and point me somewhere what I am doing worng. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
