> Just to throw this out there for the group. I had a box of OEM SMC NICs > and have been using them in all systems I build including * boxes. They > seem to work great in Windows machines and even plain old Linux > workstations but apparently not all that well when realtime is required. > I would get random and usually sparse disconnects and lose registrations > with phones and IAX peers. I kept getting "eth0 too much work at > interrupt" and thought that it was an irq problem. I made sure that > nothing was sharing IRQs and the problem still persisted. Finally looking > at the error and ruling out the interrupt part I was left with the eth0 > part. > > Long story made short I swapped out the SMC NICs with 3com and the world > is right again. I have absolutely no errors in the console and every > phone and peer stays available. If you are having problems and connot > isolate why, try another NIC. > > Thanks, > Steve Totaro
I'm having this very same problem with 3COM 3c905-tx/tx-m NIC. I never thought it might somehow relate to Asterisk. My kernel is 2.4.26 with Debian patches (distro is unstable Debian SID) and motherboard has VIA chipset. Regards, Harry Flink _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
