Am Do, den 27.05.2004 schrieb Thorsten Huber um 16:42: > Hi, > > On Thu, May 27, 2004 at 03:53:08PM +0200, Wolfgang Pichler wrote: > > > ... > > > > Here is my actual config (capi.conf) > > > ... > > > > [interfaces] > > > > isdnmode=ptmp > > > > msn=073266xxxx > > > > > > in my setup I'm using only the localpart as msn without the long > > > distance dial prefix. Did you try this? > > yep - i already tryied this - didn't worked either. Does at your config > > the command "show channels" show you the capi channels ? > > show channels shows only active channels. aha - didn't know that (and there are many things i also don't know yet...) > > Without active calls there are no visible channels: > > asterisk*CLI> show channels > Channel (Context Extension Pri ) State Appl. Data > 0 active channel(s) > asterisk*CLI> capi info > Contr1: 2 B channels total, 2 B channels free. > > With an active call from ISDN to some SIP phones show channels shows > the following output: > > asterisk*CLI> show channels > Channel (Context Extension Pri ) State Appl. Data > SIP/96633-d4ca (from-sip 1 ) Up Bridged Call > CAPI[contr1/966xxxx]/0 > CAPI[contr1/966xxxx]/0 (thorsten s 1 ) Up Dial > SIP/96631&SIP/96632&SIP/96633 > 2 active channel(s) > asterisk*CLI> capi info > Contr1: 2 B channels total, 1 B channels free. > > Have you tried "debug capi"? yes - i've turned on "debug capi on" - but there is no output
but now i have seen that capiinfo segfaults when i start it (it gives me some output - then sigsev) - so i think there is something wrong with my kernel. I am now upgrading to kernel 2.6.6 and trying again _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
