Tony, I have downloades and installed the patches, (I think. I used patch -p0 /usr/src/zaptel/[patch], for bothe the zaptel ones, and [asterisk] for the asterisk one).
I have addes the ukcallerid=yes to my zapata.conf, and also got callerid=asreceived set. The phones now ring without the screen showing starting simple switch 3-4 times, but alas no callerid on my GS phone. Any thoughts or hints appreciated. Regards Dave -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Tony Hoyle Sent: 26 May 2004 13:09 To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] Caller ID with BT CD50 I keep rolling buffer of the last couple of seconds of the incoming audio, so when the ring is detected the chan_zap driver can grab this and feed it to the callerid processing routines. If it's necessary to assign copyright to digium then there's no problem doing that. At the moment there's a rather lame 'ukcallerid=yes' command... it needs something better certainly but there's plenty of time to get that stuff right. The current patches are at http://www.nodomain.org/asterisk/ Ugh. V23 after first ring... It also matters of course if the cable co. has changed the wire data format - you might be able to grab the data but then not be able to make any sense of it.. Tony -- _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
