By the way I forgot to mention that I connect to * over ISDN. I read somewhere that ISDN v.110 connection or v.120 connections are not supported with zapras. Is it true ? Did the above LCP problem occur due to that ?
> That prob is solved here's latest problem, > > ==> /var/log/messages <== > Jun 1 15:44:11 RAS pppd[1019]: Plugin zaptel.so loaded. > Jun 1 15:44:11 RAS pppd[1019]: Zaptel Plugin Initialized > Jun 1 15:44:11 RAS pppd[1019]: Using zaptel device 'stdin' > Jun 1 15:44:11 RAS pppd[1019]: pppd 2.4.1b2 started by root, uid 0 > Jun 1 15:44:11 RAS pppd[1019]: Zaptel device is 'stdin' > Jun 1 15:44:11 RAS pppd[1019]: Connected to zaptel device 'TE4/0/1/22' (22) > Jun 1 15:44:11 RAS pppd[1019]: Using interface ppp0 > Jun 1 15:44:11 RAS pppd[1019]: Connect: ppp0 <--> stdin > Jun 1 15:44:11 RAS /etc/hotplug/net.agent: assuming ppp0 is already up > > ==> /var/log/ppp-debug <== > Jun 1 15:44:11 RAS pppd[1019]: Plugin zaptel.so loaded. > Jun 1 15:44:11 RAS pppd[1019]: Zaptel Plugin Initialized > Jun 1 15:44:11 RAS pppd[1019]: Using zaptel device 'stdin' > Jun 1 15:44:11 RAS pppd[1019]: pppd 2.4.1b2 started by root, uid 0 > Jun 1 15:44:11 RAS pppd[1019]: Zaptel device is 'stdin' > Jun 1 15:44:11 RAS pppd[1019]: Connected to zaptel device 'TE4/0/1/22' (22) > Jun 1 15:44:11 RAS pppd[1019]: using channel 6 > Jun 1 15:44:11 RAS pppd[1019]: Using interface ppp0 > Jun 1 15:44:11 RAS pppd[1019]: Connect: ppp0 <--> stdin > Jun 1 15:44:11 RAS pppd[1019]: sent [LCP ConfReq id=0x1 <magic 0x22d75992>] > > ==> /var/log/messages <== > Jun 1 15:44:41 RAS pppd[1019]: LCP: timeout sending Config-Requests > Jun 1 15:44:41 RAS pppd[1019]: Connection terminated. > Jun 1 15:44:41 RAS pppd[1019]: Disconnect from zaptel > Jun 1 15:44:41 RAS pppd[1019]: Exit. > Jun 1 15:44:41 RAS /etc/hotplug/net.agent: NET unregister event not > supported > > ==> /var/log/ppp-debug <== > Jun 1 15:44:38 RAS last message repeated 9 times > Jun 1 15:44:41 RAS pppd[1019]: LCP: timeout sending Config-Requests > Jun 1 15:44:41 RAS pppd[1019]: Connection terminated. > Jun 1 15:44:41 RAS pppd[1019]: Disconnect from zaptel > Jun 1 15:44:41 RAS pppd[1019]: Exit. > > It has something to do with LCP. Are we moving in the correct path here ? > And after 1 minute the phone says the "call was not answered" > > PLATFORM: redhat 9.0 > > > <hi! > > <I'm trying to get zapras working in GSM csd network. Whenever a dialup call > is initiated from the mobile <to the * gateway the following appears in the > log and zapras terminates. Phone gives the error dialup not <answered. > > <==> /var/log/messages <== > <pppd[2310]: Plugin zaptel.so loaded. > <pppd[2310]: Zaptel Plugin Initialized > <pppd[2310]: Using zaptel device 'stdin' > <pppd[2310]: pppd 2.4.1b2 started by root, uid 0 > <pppd[2310]: Zaptel device is 'stdin' > <kernel: Zaptel: Zaptel PPP support not compiled in > <pppd[2310]: Unable to put device 'stdin' into HDLC mode > <pppd[2310]: Exit. > > > <I patched the given pppd with the two patches > <ppp-2.4.1-pppoe.patch4, ppp-2.4.1b2-zaptel.patch > > <I recompiled my kernel to spupport, > <Network device support -> PPP over Ethernet (EXPERIMENTAL) > <But the result didn't change. > > <And kernel has this option ticked ( * ), > <My kenerl has ISDN support -> Support synchronous PPP > > > <what could be wrong here ? Am I missing anything in the kernel. Or ppp not > configured not properly ? <Need ur thoughts on this. > > <thanks in advance, > <denzel. > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users