I am trying to get a new Asterisk installation running using a Zultys ZIP2 phone and a Uniden 200 phone. I have the system working reasonably well (although probably not optimal) except for a couple of items.
First, I can’t get the voice mail message light to work on the Zultys phone but it works just fine on the Uniden phone.
Second, the time presented on the Uniden UIP200 phone is 1 hour off from the time of the asterisk server. This is probably a Uniden issue but I thought I would check here and see if anyone has had this problem (BS4.54 firmware). The Uniden configuration that is TFTP’s to the phone is set correctly for my UTC offset and DST status.
Finally, the Zultys ZIP2 has “paging support” using a stream on port 3771 by default. Is this part of a standard RFC? Does Asterisk support this?
Erich
sip.conf excerpt
[6001]
type=friend
secret=blah
host=dynamic
m[EMAIL PROTECTED]
callerid=Uniden
dtmfmode=rfc2833
disallow=all
allow=ulaw
allow=alaw
