Hi,
We have two of these 4 port FXO cards.
However, we are having some problems with incoming/outgoing calls.
The latest version of Asterisk/zaptel from CVS is being used. Voicemail, internal SIP <-> SIP calls between Pingtel xpressa hard phones work terrific, echotest is fine, and so on.
The zaptel and wcfxs modules load fine, and show all 8 FXO interfaces in dmesg:
--------------------------------------------------------- Zapata Telephony Interface Registered on major 196 Freshmaker version: 63 Freshmaker passed register test Module 0: Installed -- AUTO FXO Module 1: Installed -- AUTO FXO Module 2: Installed -- AUTO FXO Module 3: Installed -- AUTO FXO Found a Wildcard TDM: Wildcard TDM400P REV E/F (4 modules) Freshmaker version: 63 Freshmaker passed register test Module 0: Installed -- AUTO FXO Module 1: Installed -- AUTO FXO Module 2: Installed -- AUTO FXO Module 3: Installed -- AUTO FXO Found a Wildcard TDM: Wildcard TDM400P REV E/F (4 modules) Registered tone zone 0 (United States / North America) Registered tone zone 0 (United States / North America) ---------------------------------------------------------
Following problems have been observed, and are preventing us from dumping our existing Nortel Merdian PBX:
1. echo at beginning of call for several seconds, even with various combinations of echocancel and echotraining in zapata.conf
2. even though multiple incoming lines are connected, only the first ZAP channel is picking up. So if
one line is in use, nobody else can call in even though there are other
lines free. When in debug mode (-gcvvv) nothing is showing up that there's another call coming in.
3. channels don't always hang up properly - HookState shows as offhook for quite some time.
4. Asterisk Zap channels don't see an incoming call until 2 rings after
the existing Nortel PBX sees it. Both people calling in and people answering don't like that.
I've gone through whatever documentation and mailing list archives, but haven't been able to find working solutions. Have tried various combinations in zaptel.conf and zapta.conf but no luck yet :-(
Ideas anyone?
Thanks,
Wim _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
