Hi, Currently WJ.00.0B-T01 which is the absolute latest I've managed to squeeze out of ZyXEL.
Using the previous .0A version the problem was all the time. Doing outbound SIP call - pressing hangup after SIP INVITE but before the call was answered and no SIP CANCEL was ever send. The new one seem to send the CANCEL most of the time - although I have experienced it not hanging up properly - just haven't had a chance to capture a good trace on the behaviour. Anyway - I just bought a couple of the phones to test them out. They seem pretty beta quality overall. The GUI is emberassingly poor - both the web-based one and the built-in one. The phone is WAY of it's promised battery life (both mine have a stand-by time of less then 14 hours fully charged - I have no idea about the talk time). > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Markus > Engelbrecht > Sent: 03 June 2004 14:27 > To: [EMAIL PROTECTED] > Subject: AW: [Asterisk-Users] ZyXEL Prestige 2000W SIP hangup fails > > > Hello, > > which firmware are you using? I don't have problems like that. If > I dial and > no one picks up the phone it stops ringing on the other side. I > didn't have > a trace on hand right now but I'm pretty sure that I saw those "Cancel" > during other tracings. > > Best Regards, > Markus > > > -----Urspr�ngliche Nachricht----- > > Von: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] Im Auftrag von > > Lars Boegild Thomsen > > Gesendet: Donnerstag, 3. Juni 2004 08:07 > > An: [EMAIL PROTECTED] > > Betreff: RE: [Asterisk-Users] ZyXEL Prestige 2000W SIP hangup fails > > > > I have noticed this one and I have also informed ZyXEL, but > > their response was vague to say the least. It is correct > > that the ZyXEL phone does not send a SIP Cancel when you > > disconnect an outgoing call that has not yet been picked up > > by the remote end. > > > > I have several times asked ZyXEL to put a formal bug report > > procedure in place with proper tracking but to no avail. > > > > Regards, > > > > Lars... > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED] Behalf Of > > Dominique > > > Kull > > > Sent: 02 June 2004 22:46 > > > To: [EMAIL PROTECTED] > > > Subject: [Asterisk-Users] ZyXEL Prestige 2000W SIP hangup fails > > > > > > > > > Does anybody have any experience with the ZyXEL Prestige > > 2000W? I am > > > having problems with the line tear down when I call another > > extension. > > > If nobody picks up at the other end when I hangup the > > 2000W, the other > > > extension continues to ring. Is there any way to hangup a > > SIP call if > > > there is no more traffic? Asterisk seems to think that > > there is still > > > a connection open. This is pretty annoying since it always > > leaves an > > > empty VM. > > > > > > thanks > > > Dominique > > > > > > _______________________________________________ > > > Asterisk-Users mailing list > > > [EMAIL PROTECTED] > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > To UNSUBSCRIBE or update options visit: > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
