Paulo Mannheimer wrote:
l but couldn't figure out what bits should we try to set to test other card options.
Is there any documentation on the card that could help us?
Hi Paulo, try link (its about chip DS21[35]54 on e100p): http://www.maxim-ic.com/appnotes.cfm?appnote_number=481
afaik wct1xxp don't send E-bit (bit 2 of "Transmit Control Register 2" must be set to 1 to set E-bit) so Telco side have no info about CRC
if you wisch i can send you my version of wct1xxp, unfortunately old CVS - 15-09-2003 and dirty code :-( , working good with Lucent 5ESS on Telco side. (contact me off-list)
additionaly this patch show some info about errors on E1 line: VCR,CRC,EBCR and FASCR
and is possible to change input impedance from 120 OHM to 120 OHM with resistors or 120 OHM with high resistors - just for test purposes.
Konrad
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
