OK, so I am an idiot, with the use if the h extension I can set the moderator code to 0 on hangup. Cannot believe I missed that one.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Bruce Marler Sent: Friday, June 04, 2004 11:27 PM To: [EMAIL PROTECTED] Subject: RE: [Asterisk-Users] Meetme with moderator Florian,All, So I did what was noted below, here what I run into though, how do I set the DB entry for moderator after the moderator hangs up. I just read the other posts to the list about continuing after a hangup, but that is based on the dial command and not meetme. Here is what I have setup now for my simple testing, basically i dial 100 it asks for conf # , if they dial 101 it sets moderator code to 1, if they dial 102 it checks it and lets them in if it is 1, unfortuatnely it stays 1 even after the moderator hangups: [conferences] exten => 101,1,Answer exten => 101,2,Wait(1) exten => 101,3,DBput(Moderator/55555=1) exten => 101,4,Meetme(55555) exten => 101,6,Hangup exten => 102,1,Answer exten => 102,2,Wait(1) exten => 102,3,DBget(55555Admin=Moderator/55555) exten => 102,4,Gotoif($[${55555Admin} = 1]?55555,1:5550001:1) exten => 100,1,Answer exten => 100,2,Wait(1) exten => 100,3,DigitTimeout,5 exten => 100,4,ResponseTimeout,8 exten => 100,5,BackGround(enter-conf-call-number) exten => 100,6,Waitexten(20) exten => 100,7,Goto(100,5) exten => 55555,1,Meetme(55555) exten => 55555,2,hangup > -----Original Message----- > I have been beating my head against a wall trying to figure > out how I would implement a separate moderator code and > participant code for the same conference using meetme, the > deal is I dont want the participants to be able to join until > the moderator is in the conference. > > Is it possible to do this using the apps as they are , or is > their a way to use an Agi script, is that the only way? Simple extension logic is enough to do this: >From a certain extension or with a special pincode or whatever, have moderator access. Be sure to set a database entry (/MMModerator/Roomnr/ = 1) before accessing the MeetMe. For all others, first check this database entry. Only access MeetMe if the flag is set. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
