> At least for PTMP (Mehrgeräteanschluss) the MSN does not contain the
> areacode.
Thanks for the info. Somewhere in the list archive I saw a hint to use the
areacode as well. Now tried it without and had the same (non)success:
-- Executing Dial("SIP/hschurig-ced5", "CAPI/9141:0170811xxxx|60|T") in
new stack
-- data = 9141:0170811xxxx
-- capi request omsn = 9141
== found capi with omsn = 9141
== CAPI Call CAPI[contr1/9141]/1 -- creating pipe for PLCI=-1
> sent CONNECT_REQ MN =0x5
-- Called 9141:01708112001
-- CONNECT_CONF ID=001 #0x0005 LEN=0014
Controller/PLCI/NCCI = 0x101
Info = 0x0
-- CONNECT_CONF ID=001 #0x0005 LEN=0014
Controller/PLCI/NCCI = 0x101
Info = 0x0
== received CONNECT_CONF PLCI = 0x101 INFO = 0
-- DISCONNECT_IND ID=001 #0x001c LEN=0014
Controller/PLCI/NCCI = 0x101
Reason = 0x3302
== DISCONNECT_IND PLCI=0x101 REASON=0x3302
> sent DISCONNECT_RESP PLCI=0x101
-- CAPI Hangingup
-- removed pipe for PLCI = 0x101
== No one is available to answer at this time
BTW: at a different NTBA (which is a PTMP for an ISDN router) I can call
out and receive calls, so the chan_capi + fcpci + capi chain is known to
work.
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
