I do not have a Cisco ATA-186 but rather a Grandstream Handytone
ATA-286... To get MWI going on it I would assume you would do the same.
You put it in your sip.conf... Here's my example...
[201]
type=friend
secret=xxxxxxxxx
host=dynamic
context=intern
canreinvite=no
dtmfmode=rfc2833
mailbox=201
....of course it not being exactly the same :D
Hope this works out for you.
Stephen Rosebush
[EMAIL PROTECTED]
Jacob Hunter wrote:
I am trying to set up the Message Waiting Indicator (stutter
tone/light) so that my cisco ata-186 will let my phones know there is
a message waiting. However this does not seem to be very well
documented.
I found this on wiki [EMAIL PROTECTED] ... where does that go?
Do I put it in my SIP.conf definition for my cisco ata, or where. In
my SIP cisco definition i already have a mailbox=mailboxnumber. What
do I need to do to get this to work? And which context am I putting
there, is it the same context as the sip device, or is the context
from the voicemail.conf.
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
