Did you try the new sip firmware update? The latest is version 1.2 and has some fixes for what you're trying to do.
John On Mon, 2004-06-14 at 14:21, Tor Roberts wrote: > Eric, > I tried this and could not get it to work. What I ended up doing is > giving each button a different extension and then set the phone to > "divert" to the second extension on busy. This is done with the "busy > divert.busy.1.enabled=" and "divert.busy.1.contact=" tags in the > phones config file. This has some drawbacks in that you have to make way > more extensions, but you also have to use call waiting on each line. > If there is a better way to do it, I would like to hear it. But this > does get the job done. It would be great if you could just register all > the lines to the same extension. > > -Tor Roberts > > Eric Mandel wrote: > > >I am getting ready to install Asterisk and I was looking into the Polycom > >IP600 phones. I spoke with Polycom sales to verify the multiple line > >appearance and they said it would work. More specifically, if lines 1-3 all > >contain the same SIP registration info, the Polycom will only send out 1 SIP > >registration to the server and then handle the calls ringing on multiple > >lines. > > > >I was wondering if anyone can confirm that this works with the polycoms. I > >know the 7960s support this, but I want to make sure the Polycom sales team > >wasn't just saying Yes to make the sale. > > > >Any comments are appreciated. > > > >-Eric > > > >-----Original Message----- > >Subject: fwd on busy when calling multiple extensions at once > > > >Chris A. Icide wrote: > > > > > > > >>IMHO, the Polycom IP600 is a superior phone to the cisco 79XX phones. > >>I base this off of having had both an IP600 and a 7960. The two > >>advantages the 7960 had over the IP600 was appearance and ease of > >>configuration. Outside of that, the IP600 (IMHO) beat the cisco hands > >>down. > >> > >>Now, you MAY want to try registering all 6 lines on the polycom to the > >>same line and see if the phone handles that as well as the cisco. If > >>it does, then you are set. Otherwise, you will need some complex > >>configuration work in your extensions.conf to achieve what you are > >>looking to achieve. > >> > >>Some thoughts: > >> > >>What do you want to happen when one of the call takers has all 6 lines > >>in use? > >> > >>Have you considered using queues to do what you need? > >> > >>-Chris > >> > >>On 10:08 AM 5/22/2004, Brian Cuthie wrote: > >> > >> > >>>You might consider using the Cisco SIP phones. They're smart enough > >>>to accept incoming calls for as many call appearances you have with > >>>the same SIP registration. > >>> > >>>-brian > >>> > >>>Tor Roberts wrote: > >>> > >>> > >>> > >>>>Hi, > >>>>I am setting up a dispatch center where will have 4 call takers, > >>>>all with Polycom IP 600 Sip phones. Each phone will be setup with 6 > >>>>extensions each. When a new call comes in, the first extension on > >>>>all the phones will ring. This works fine, the problem is when one > >>>>of the dispatchers is already using her first extension and another > >>>>call comes in. What happens now is that the remaining 3 phones ring > >>>>on the first extension, but the dispatcher who is on a call, her > >>>>phone does not ring. I want her second extension ring along with > >>>>the other 3 phones first extensions. > >>>> > >>>>In sip.conf I have all the extensions set to incominglimit=1 and > >>>>the pertinent part of extensions.conf is: > >>>> > >>>>exten => s,1,Dial(SIP/5000&SIP5001&SIP5002&SIP5003,20,tr) > >>>>exten => s,2,Dial(SIP/5004&SIP5005&SIP5006&SIP5007,20,tr) > >>>> > >>>>and so on. > >>>> > >>>>If anybody has any insight, or a better solution, that would be great. > >>>> > >>>>Thanks, > >>>> > >>>>-Tor Roberts > >>>> > >>>> > > > > > > > > > > > > > > > > > > > > > >_______________________________________________ > >Asterisk-Users mailing list > >[EMAIL PROTECTED] > >http://lists.digium.com/mailman/listinfo/asterisk-users > >To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
