Hi That rescue disk sugestion seems to be very good...
Let�s see if i undestood: 1. burn the rescue iso 1. copy the rescue disk to a hard drive 2. compile asterisk 3. copy all to the flash disk It is that simple? Miklos ----- Original Message ----- From: "Klaus-Peter Junghanns" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, June 17, 2004 5:11 AM Subject: Re: [Asterisk-Users] embedded Asterisk > Hi, > > > Actually, you the Geode CPU mentioned below is a 5x86 (486 platform) at > > 233 MHz. If you take Pebble (http://www.nycwireless.net/pebble/), which > > is a downstripped Debian (< 64 MB) on a readonly ext2 filesystem, you > > should be grand. Installing asterisk + some extra stuff will probably > > require, that you have at least a 128MB or 256MB flash or so. > > Dont go for "stripped down but complete" distributions which include a > lot of stuff that you dont need, e.g. gcc. Go for a rescue system, like > i used the SuSE rescue system (14 mb), then you can add what you need > (sshd,...) and compile asterisk on another box and then just copy it. > My compressed ramdisk image is 32 mb, including all voice prompts and > some mp3s for MOH. > > > > > There are actually quite some board around on that CPU, like Soekris, > > pcengines and i think also Mikrotik at prices from 120EUR and up. > > > I just put together the demo system for Linuxtag: > - Via EPIA 5000 (C3-533), EUR 80,- > - Morex case with external power supply, EUR 80,- > - some old 256 mb SDRAMM > - 128 MB USB memory stick, EUR 30,- > - 1 quadBRI (could also easily handle an octoBRI, or a PRI card, > with the dual riser pci card you can use 2 cards) > > The C3-533 is an i586 CPU. According to "show translation" it needs > 30 ms for transcoding 1 channel from g711 to gsm (and vice versa). > So, neglecting any overhead caused by channel handling it could > transcode 30 channels to gsm. > > Linux BIOS has support for the EPIA boards, so you can speed up booting > very much and also disable the VGA port (very useful for production > deployments....). > > > I'm running pebble on a pcengines board, just needed to customize the > > kernel a bit, haven't been testing asterisk on that yet, but i definatly > > will in the sooner future. > > > > Kind regards, > > Martin List-Petersen > > martin (at) list (dash) petersen (dot) net > > best regards > > Klaus > -- > Klaus-Peter Junghanns > > CEO, CTO > Junghanns.NET GmbH > Breite Strasse 13a - 12167 Berlin - Germany > fon: (de) +49 30 79705390 > fon: (uk) +44 870 1244692 > fax: (de) +49 30 79705391 > iaxtel: 1-700-157-8753 > http://www.Junghanns.NET/asterisk/ > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
