Hi Mike,
To get something like:
Coarse carrier frequency 1832.96 (4) Training error 927.702492 Training failed (convergence failed)
something is horribly wrong. The carrier should be 1700Hz, not 1832.96Hz :-)
Do you have a codec mismatch, or are you using a codec other than u-law or A-law? Sometimes the slow control messages will get through the wrong modem, but the fast modem for the images never will.
Regards, Steve
Mike Benoit wrote:
I'm trying to send a fax to my asterisk box, however shortly after connecting the fax machine reports a "communication error" and hangs up. Below is the error I get from RxFax: Fast carrier training failed
Nothing is written to the file system as far as the tiff is concerned.
Any ideas on how to fix this? Thanks
----
Sending Fax Machine: HP PSC 2000 Series 2210 Printer/Fax/Copier/Scanner
Asterisk: CVS-HEAD-06/14/04-15:43:15
SpanDSP: spandsp-0.0.1k
FXO Card: X100P
Interesting zapata.conf lines: --------------- echocancel=yes echocancelwhenbridged=yes echotraining=yes rxgain=10.5 txgain=-4.5 faxdetect=incoming
Log:
---------------
Jun 16 21:45:40 NOTICE[1199700912]: callerid.c:239 callerid_feed:
Caller*ID failed checksum
Jun 16 21:45:43 NOTICE[1199700912]: chan_zap.c:4951 ss_thread: Got event
2 (Ring/Answered)...
-- Executing Answer("Zap/2-1", "") in new stack
-- Executing Wait("Zap/2-1", "1") in new stack
-- Executing DigitTimeout("Zap/2-1", "5") in new stack
-- Set Digit Timeout to 5
-- Executing ResponseTimeout("Zap/2-1", "10") in new stack
-- Set Response Timeout to 10
-- Executing SetMusicOnHold("Zap/2-1", "default") in new stack
-- Executing SetCallerID("Zap/2-1", "") in new stack
-- Executing SetCIDName("Zap/2-1", "") in new stack
-- Executing BackGround("Zap/2-1", "thank-you-for-calling") in new
stack
-- Playing 'thank-you-for-calling' (language 'en')
-- Redirecting Zap/2-1 to fax extension
== Spawn extension (mainmenu, fax, 0) exited non-zero on 'Zap/2-1'
-- Executing Goto("Zap/2-1", "fax|699|1") in new stack
-- Goto (fax,699,1)
-- Executing Macro("Zap/2-1", "faxreceive") in new stack
-- Executing SetVar("Zap/2-1", "FAXFILE=/var/spool/asterisk-
fax/1087447538.0.tif") in new stack
-- Executing SetVar("Zap/2-1", "[EMAIL PROTECTED]") in
new stack
-- Executing RxFAX("Zap/2-1", "/var/spool/asterisk-fax/1087447538.0.
tif") in new stack
Changed from phase 0 to 1
Slow carrier up
Start receiving document
Changed from phase 1 to 4
Sending ident
DIS:CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
Preferred octets: 256
Can receive fax
Supported data signalling rates: V.27ter and V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Minimum scan line time for higher resolutions: T15.4 = T7.7
DIS: 80 00 ce f0 80 80 01
HDLC underflow in state 9 Changed from phase 4 to 3 Slow carrier up <<< DCS: 83 00 c6 f0 80 80 00 DCS with final frame tag In state 9 DCS: Can receive fax Selected data signalling rate: V.29, 9600bps R8x7.7lines/mm and/or 200x200pels/25.4mm OK 2D coding OK Scan line length: 215mm Recording length: A4 (297mm) Minimum scan line time: 0ms Minimum scan line time for higher resolutions: T15.4 = T7.7 Get at 9600 Changed from phase 3 to 5 Fast carrier up Coarse carrier frequency 1832.96 (4) Training error 927.702492 Training failed (convergence failed) Fast carrier training failed -- Executing System("Zap/2-1", "/usr/local/sbin/mailfax /var/spool/ asterisk-fax/1087447538.0.tif [EMAIL PROTECTED] ") in new stack TIFFOpen: /var/spool/asterisk-fax/1087447538.0.tif: Cannot open.
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
