On Fri, 2004-06-18 at 15:16, Bernie Hoeneisen wrote: > Hi! > > I trying to configure * in a way, that it uses a different CLIP (Caller-Id > in ISDN) per SIP user, when relaying the call from SIP to the ISDN. So far > always the main (1st) number of the number-block is sent to the ISDN. > > I have a E100P from Digium and use the zapata stuff (chan_zap). > All SIP calls are coming through an SER.
Have you tried just to use SetCallerID in * before you dispatch the call to your ZAP channel ? > One idea I had in mind is to assign userid's in SIP, that match the > extension of the number block, e.g. "854". * could then take > the user part of the From header field of the incoming SIP INVITE and > relay this numeric user part (e.g. 854) to the chan_zap, so that the > CLIP in the ISDN appears as the number assigned to SIP user. You can also maintain a database (astdb etc.) which matches the phoneno.'s against you SIP id's, but your suggestion is easier. Maintainance free. It depends a bit on what userbase you have for your SIP users. How much you manage them or if they are created/maintained by third party. Kind regards, Martin List-Petersen martin (at) list (dash) petersen (dot) net _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users