Hi *, I can specify my question: When calling from analogue phones, the whole number (6+3 digits) does not come "ISDN-style" (=9 digits as a whole), but at first the 6 digits, and the 3 additional ones in the "INFO" field of the ISDN protocol.
Here's what extensive debuggin says: --- < Message type: INFORMATION (123) < Called Number (len= 6) [ Ext: 1 TON: Subscriber Number (4) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '999' ] Sending Receiver Ready (49) --- How can Asterisk receice these digits? Regards, thomas On 21 Jun 2004 at 18:53, Thomas Schroeter wrote: > > > I have got the following problem (E100P, pri_cpe): > > > My number range is <6digits>xyz. (e.g. 123456-999) > > > >From ISDN phones, everything's fine, but calling in from analogue > > > >phones causes the > > > following problem: Asterisk only receives the first 6 digits. > > Do you have overlapdial=yes in your zapata.conf? > > Yes, I have. > Hope that helps...? > > > Regards, > Thomas > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
