Is your kernel ACPI enabled ? The motherboard in the PE400SC is basically the Dimension 8300, which i use for my development box with 1 X101P, 1 TDM400P and two ISDN cards here at home and that works without problems.
One thing to make sure with these boards is that ACPI is enabled, since they are ACPI only. Kind regards, Martin List-Petersen On Thu, 2004-06-24 at 02:58, Isamar Maia wrote: > I have a Dell PowerEdge 400SC with a X100P and a TDM01b. > The board works wonderfully in another machine but in this brand new one, > it just get in nuts. > > The problem is: > > 1) Zaptel recognizes it perfectly > 2) No IRQ conflicts, two-wire new cable. > 3) Asterisk starts up and listen the ring and answer the cal > 4) RIght after answering the call, it's dropped. > 5) The following calls, even with asterisk off, the driver(???) answers > the call and hang it up. With the * running, it doesn't even get any ring, > and the call is answered and dropped right away. > > Isamar > > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
