Jason Kawakami wrote:
Subject: [Asterisk-Users] Can one send CLID NAME over PRI?
Reply-To: [EMAIL PROTECTED]
Is it possible to send CLID NAME on a PRI?
The numbers we send out are being received by telco and propagated,
but the names we send out are not showing up.
Is this a feature in PRI? Do we need to set PRI_NET instead of PRI_CPE?
Is this just not possible? Is this a telco config issue?
my experience with this is the carrier is doing some matching of presented
number (what you are sending them) to their records of the 'owner' of that
number.
You're correct; the telco takes the number you've sent and uses their
own database to figure out CLID name.
If for example you present your billing telephone number to them
they will send out your name with the number but otherwise I have had little
success.
I have heard of working with a local/regional ps or carrier 911 coordinator
to have this fixed but have had no experience with it.
If the OP is trying to get correct location information to a PSAP, he
might have the telco set up several phone numbers with the physical
address of each building, so that when dialing out, they see the correct
location of the emergency call. This would be easy enough to set up in
the dialplan or even sip.conf.
Nick
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
