Hi all,
I was excited to see the announcement on the list regarding the fix for the echo problems on Digium FXO cards!
I have 2 X101P's, TDM400P with 4 FXS modules and couple of XLite softphones. A few months back,I had gone thru the recommendation on the list to remove echo from the SIP phones(I never did have any echo on the TDM400P FXS phones), and had removed about 90% of the echo. There was still some occassionally that I couldn't figure out how to get rid of.
I used MARK2 without the AGRESSIVE cancel option with the following zaptel.conf settings before the latest path:
echocancel=yes echocancelwhenbridged=yes echotraining=yes rxgain=8.0
after applying the patch my settings are the same except for:
echotraining=800
Problem:
I'm seeing is that echo is actually worse on the XLite SIP phones! Also, my wife is telling me that the Vtech 5.8 Ghz cordless attached to the TDM400P now actually has some echo, when it never did before. (I received the infamous, "What did you do to the phone...it sounds terrible!")
Any ideas or suggestions?
Will the path affect the rxgain setting? Will that need to be re-adjusted?
What would cause echo to show up on the TDM400P FXS phones?
Is the success people are seeing with the echo patch using the AGRESSIVE suppressor?
Thanks in advance, Ed Rubright
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
