Hans-Henrik Andresen wrote:
I seriously doubt 1 server will handle that type of load (unless you throw about 15 processors in it)..Hi,
A'm about to set up a asterisk for 5000 users, and the customer had a 64bit server - can asterisk compile on that ? I will use a digium X100P for timing use will that do on a 64bit ? (I'm using SUSE91 kernel 2.6)
What else ? Is it posible to have only one server for 5000 users ? I gues that it will be 5-700 sim. users only talking sip, and IAX2 to my PSTN-Gateway.
The system is suposed to scale to 15000 users.
I'm ready to receive input :)
/Hans-Henrik Andresen
My advice would be to setup 1 server per 1000 users (working on appox 10 to 1 ratio of active calls) then setup IAX trunks between the servers and the PSTN gateways..
This way if a server fails then you only have 1000 users down and not the whole company..
Later.. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
