Upgrade your firmware on the SPA-2000 and see if it fixes the one way audio problem. I had this problem and worked with Sipura to get it resolved. If you are running a firmware earlier then version 2.0.6(c) then you will have this problem.
Matt -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Seth Mattinen Sent: Sunday, June 20, 2004 2:00 PM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] One way audio Perhaps I was a little too hasty in my conclusions of dysfunctional fax on the SPA-2000. It turns out I have a one way audio problem on line one of my SPA-2000. I have all the correct settings according to the comments in the wiki, but the problem persists. However, if I do a hook flash out of and back in to the call that isn't transmitting audio, it works fine. My sip.conf entry for the offending line looks like this: [202] type=friend username=202 secret=voip-analog0 host=dynamic context=from-sip reinvite=no canreinvite=no disallow=all allow=ulaw nat=0 It works fine when calling between internally, or when the SPA-2000 is the calling source, but if a call comes in on a zap channel, the one way audio problem appears. -- Seth "et lux in tenebris lucet" Mattinen [EMAIL PROTECTED] _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
