Yup, forgot to post that in my last message, thank you though. -Making connections.
connect a:1:1-8 1:1-8 connect a:1:9-16 2:1-8 connect a:1:17-24 3:1-8 connect a:2:1-8 4:1-8 connect a:2:9-16 5:1-8 connect a:2:17-24 6:1-8 Sorry about breaking the previous thread, I just changed my settings to 'NON-digest' to get every message. Also, thank you and the others fellas for answering my questions. One last thing. zttool shows 'nop' status, and I can't see any of the channels 25-48 when doing 'zap show channels'. I reset the Adit and restart asterisk, is there somthing I'm missing? ----- Original Message ----- From: "Joe Antkowiak" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, June 28, 2004 9:29 PM Subject: RE: [Asterisk-Users] Adit 600 - Getting Dial Tone Don't forget, you also have to connect the t1 channels to the slots on the adit: connect a:1:1-8 1:1-8 connect a:1:9-16 2:1-8 connect a:1:17-24 3:1-8 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Joshua McClintock Sent: Tuesday, June 29, 2004 12:25 AM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] Adit 600 - Getting Dial Tone Ok so to be clear about what I need to have setup: Asterisk side: Configure T1 card like this (it's the 2nd T1 card I have in the system). span=2,1,0,esf,b8zs,yellow fxsls=25-48 Use FXO signalling in my zapata.conf [channel-bank] signalling=fxo_ls context=cb-in group=2 channel=> 25-48 Adit 600 side: -Setting slot a. set a:1 up set a:1 fdl none set a:1 lbo 1 set a:1 framing esf set a:1 id "T1 to Asterisk" set a:1 linecode b8zs set a:1 loopdetect on set a:1:1-24 side drop set a:1:1-24 type voice set a:1:1-24 signal ls -Setting slot 1. set 1:1-8 signal ls set 1:1-8 txgain -3 set 1:1-8 rxgain -6 set 1:1-8 impedance 19 -Setting slot 2. set 2:1-8 signal ls set 2:1-8 txgain -3 set 2:1-8 rxgain -6 set 2:1-8 impedance 19 -Setting slot 3. set 3:1-8 signal ls set 3:1-8 txgain -3 set 3:1-8 rxgain -6 set 3:1-8 impedance 19 On Mon, 2004-06-28 at 22:12, Andrew Kohlsmith wrote: > On Monday 28 June 2004 23:04, Joshua McClintock wrote: > > Hello, I have an Adit 600 (3 FXS cards) hooked up to a digium T1 card in my > > asterisk box. I 'connected' the slots to the a:1 T1 interfaces via the > > command line. The slots (3 fxs) are configured with 'ls' signaling. I > > configured the T1 card with the same line settings as the T1 interfaces on > > the adit and I get green lights on both the T1 card and the T1 interface on > > the adit (so they seem to be happy at that link level). I configured the > > T1 interface in the asterisk box to do 'fxsls' signaling on all 24 > > channels. > > First things first: FXS ports use FXO signalling. > > > 1. Should I be getting dial tone on my punch down block yet? I can tell > > the handset it getting power when I touch it to the correct places on the > > punch down block, but no dial tone. Does asterisk need to be aware of > > these channels before dial tone will be heard? > > You won't get dialtone until Asterisk properly configured and running; it's > what generates the dialtone. > > > 2. Did I configure the digium card correctly? Does it need to be setup as > > fxo on the asterisk side and fxs on the channel bank side? > > No, it is set up as FXS, but remember that FXS ports use FXO signalling. > > out of curiousity, why did you choose an Adit600+T1 card for three FXS ports? > The TDM400P works great for FXS. 3 slots means 24 ports. 3 cards x 8 ports per card. BTW, when you get asterisk happy and the signalling correct, for looopstart or kewlstart, all the properly configured port indicators will turn green and turn yellow/orange on pick up. If in groundstart mode they will stay off and turn green upon connection. -- Steven Critchfield <[EMAIL PROTECTED]> _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
