|
never mind, new server + upgrades on the phones
sofware+ latest asterisk cvs = :)
----- Original Message -----
Sent: Friday, June 25, 2004 6:59 PM
Subject: Re: [Asterisk-Users] chan_sip.c
max number of retries
One thing I forgot to mention in the first
post. I also can call sip-sip on the old server but not on the new
server, however I can call from sip-zap on the new. When I dial from one
sip to the other I get no ringback on the calling set and the called phone
doesn't ring either. After a short time the calling set gives up and
goes to voicemail. I'm sure I'm doing something dumb or I've screwed up
a config I'm not thinking of right now. I've googled and deja searches,
but I'm stumped. I even reloaded the os on the new
machine and I get the exact same error.
Thanks again,
Robb
Has anyone who's gotten this message managed to
figure it out and fix it? I've been scouring the mailing list for
clues but I'm still no closer.
I have 2 asterisk servers, old and new.
I'm trying to switch to the new server. I am using a 2.4 kernel
on the new and a 2.6 on the old. I am running 0.9.0 on the old and my
sip phones work fine, on the new Ihave tried 0.9.0, 0.9.1, and current CVS
builds. I never see this error on th eold machine and always on the
new machine. I have copied all my configs directly and they are
plugged into the same switch as each other and the phones. the
only difference (aside from hardware) is the kernels (I had to drop back to
get zaptel to compile) and the new has an X100p fxo
card. The only change I have made to the phones (zultys
4x4's) is to change the tftp server and the SIP Proxy. If anyone
can give me a direction to look in or any advice at all, I would appreciate
it greatly.
Thanks!
Robb
|
