Thanks for the reply Leo, much appreciated. Actually turned out to be a combination of em_w signalling and putting a flash after the dial in extentions.conf (thanks to hmodes).
In case anyone else finds themselves in a simliar conundrum, configs are below: zaptel.conf - --------- span=1,2,0,d4,ami e&m=1-24 span=2,2,0,d4,ami e&m=25-48 span=3,2,0,d4,ami e&m=49-72 span=4,2,0,d4,ami e&m=73-96 loadzone = us defaultzone=us --------- zapata.conf - --------- [channels] group=1 usecallerid=yes echocancel=yes echocancelwhenbridged=yes context=pri signalling=em_w channel => 1-96 --------- extensions.conf - --------- exten => 9000,1,Dial(Zap/g1) exten => 9000,2,Flash --------- Softphones / ata / 7960 can all dial in and access the IVR app. Thanks folks, -- Cy On Tue, 29 Jun 2004, Leo Ann Boon wrote: >Cy, > >Are you using robbed bit T1 or T1 PRI? If robbed bit T1, you should need >to add the following line to /etc/zaptel.conf > >fxols=1-24 > >1-24 is for the 24 channels on the first T1. > >In /etc/asterisk/zapata.conf, you need the corresponding: >signalling=fxo_ls >channel =>> 1-24 > >I'm not totally sure this is entirely correct, since we don't use T1 on >my side of the world. > > >Cybr0t McWhulf wrote: > >>Basically, have an old IVR application running under Apex's Omnivox software on a >>box with 4 old intel dialogic D240SCs, and would like to allow remote clients to >>gain access to aforementioned IVR application via softphone, 7960, ata, etc via >>asterisk with a TE410P. >> >>Unfortunately, all I know about the dialogics is that they're configured for D4/AMI, >>which I believe I have configured right in zaptel.conf: >> >>"span=1,2,0,d4,ami", etc, etc >> >>All spans show green with crossover T1s, but no matter what I try, I get "Unable to >>create channel of type 'Zap'" whenever I try to dial out of the TE410P. I've tried >>various signalling types in zaptel.conf and zapata.conf (pri_cpe, pri_net, em_w), >>but to no avail. >> >>Also unfortunately, I'm rather newbish to asterisk as well as telco on the whole. >> >>Does anyone have any suggestions or tips? The online documentation is.. lacking, to >>say the least. >> >>Thanks in advance, >> >> -- Cy >> >>_______________________________________________ >>Asterisk-Users mailing list >>[EMAIL PROTECTED] >>http://lists.digium.com/mailman/listinfo/asterisk-users >>To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> >> >> _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
