I received a sample IP/Speakerphone from my friends in China today. Asterisk setup was fairly uncomplicated and I had it running as an extension on my server within a few minutes. Sounds quality of both the receiver and the speakerphone are fine (wife's opinion). Are there any tests I should run with this phone?
Following are the specs: - Single line appearance - Alpha display, 2x16 chars - Configurable by telnet and http; password protected - upgradeable by tftp - Protocols: sip, mgcp, h323 (only tested SIP) - DHCP or static address; support for NAT traversal - g729,g711u,g711a,g723 - configurable ringtones, user-downloadable ringtones - hold button works with asterisk - inband, rfc2833 dtmf-modes - second RJ45 PC port Physical: - 8.5" x 8.0" x 2.0" (WxDxH) - flat-black plastic - LCD can be tilted up for visibility up to about 80 degrees - Large number buttons, 13 function buttons (redial, volume, etc) Shortfalls: - Caller-ID Name doesn't seem to work - MWI doesn't seem to exist - Dialplan isn't very flexible (pretty much requires #/send for all numbers) - PC port *may* be legacy (10mbps), not FastEthernet (100mbps); not yet benchmarked Requested improvements: - Second line appearance - configurable soft-keys - distinctive ring w/ auto-answer I should be able to resell these for $75 in quantity, $80-$85 for samples/endusers. Any takers? Once the CID Name & MWI are fixed, I'll set up a pre-order list, and if there's enough interest I'll import a batch. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
