On Wednesday 30 June 2004 22:13, Scott Brooks wrote: > I have a TDM400P card all installed, and I can call out from a sip phone, > but when I call from the PSTN into the asterisk machine, as soon as the > Answer() gets called, the dial tone changes
Is there a reason you have to Answer() before you call Dial()? If you just call DIAL when calls come in, the call will be answered when Sip/pfriedel picks up. This should clear up the ring tone problem. > and is sounds like there is a > lot of static on the line. Do you hear this static when dialing out to PSTN as well? Check /proc/interrupts to make sure wcfxs has it's own IRQ. If it does have it's own IRQ, then it may the same problem that many people have had with these cards (intermittent STATIC noise). And I've yet to see/find a solution. Workaround is to unload/reload wcfxs... best to call Digium and let them know if this is the case. > > Below is the part of the dial plan for answering the call. > > > exten => s,1,Wait,1 > exten => s,2,Answer > exten => s,3,Dial(Sip/pfriedel,20,tT) > > > Thanks -- .................................. Ryan Courtnage Coalescent Systems Inc 403.244.8089 www.voxbox.ca _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
