No t or T needed it works fine if you use ulaw. I do it every single day. bkw
> -----Original Message----- > From: [EMAIL PROTECTED] [mailto:asterisk-users- > [EMAIL PROTECTED] On Behalf Of Mike Benoit > Sent: Thursday, July 01, 2004 10:32 AM > To: [EMAIL PROTECTED] > Subject: Re: [Asterisk-Users] Can't transfer with Zap and SPA-2000 > > It doesn't look like your using "t" or "T" in your Dial command. > > The Wiki on voip-info.org will explain those flags. > > On Wed, 2004-06-30 at 20:05 -0700, Seth Mattinen wrote: > > I am having trouble getting transfers to work when a zap channel is > > part of the call. I have a couple SPA-2000's and some X100P cards as my > > setup. This is what I'm trying: > > > > Dial number from phone: > > -- Executing Dial("SIP/206-2c61", "Zap/1/#######") in new stack > > Currently on call: > > -- Called 1/####### > > Press flash to place call on hold with SPA-2000: > > -- Hungup 'Zap/1-1' > > > > As soon as I press the "flash" button on my SPA-2000 connected phone, > > the zap channel hangs up and the call is disconnected. The same > > procedure works fine between SIP channels (flash to hold, or transfer). > > I'm hoping this is just a config problem and not a general defect, > > because it seems odd to me that I can't transfer calls when a zap > > channel is the other end of the call I want to transfer or place on > > hold. > > > > sip.conf: > > > > [206] > > type=friend > > username=206 > > secret=blah > > host=dynamic > > context=from-sip > > reinvite=no > > canreinvite=no > > disallow=all > > allow=ulaw > > nat=0 > > > > zapata.conf: > > > > [channels] > > language=en > > signalling=fxs_ks > > usecallerid=no > > echotraining=800 > > echocancel=yes > > echocancelwhenbridged=yes > > rxgain=2.5 > > txgain=7.0 > > busydetect=yes > > busycount=8 > > faxdetect=incoming > > context=inbound-analog1 > > channel => 1 > > context=inbound-analog2 > > channel => 2 > > > > > > > > > > -- > > Seth "experientia docet" Mattinen > > [EMAIL PROTECTED] > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > -- > Mike Benoit <[EMAIL PROTECTED]> > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
