Weee, thank you so much for that help. I can now make calls from my Cisco Call Manager to Musimi :-)
/Martin > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Soren Rathje > Sent: Saturday, July 03, 2004 3:33 AM > To: [EMAIL PROTECTED] > Subject: Re: [Asterisk-Users] H323 -> IAX > > Martin, > > Did you change the "context" parameter in oh323.conf and if > you did, did you change it to an appropriate context in your > extensions.conf where musimi.dk can be called ?? > > The reason I ask is that I've just spend 1 1/2 hour (it was > only a matter of time before I had to, so...) compiling and > installing PWLib 1.6.6, openh323 v1.13.5 and oh323 0.6.3a > onto my Fedore Core 1 with Asterisk CVS-HEAD-07/02/04-13:46:17. > > Mind you, I followed the "README" from > asterisk-oh323-0.6.3a.tgz to the letter... > > I copied my "sip-incoming" context to "h323-incoming" in > extensions.conf, changed "context=voip-h323" to > "context=h323-incoming" and "inBandDTMF=yes" in oh323.conf. > Fired up NetMeeting (Yeah.. I'm a Windows user.. So what..) > and made a call to a friend on FWD via IAX2. > > The copy/pate stuff below is from a test context I made > smilar to your trace... > > > *CLI> oh323 show conf > > Configuration of OpenH323 channel driver > ---------------------------------------- > Version: 0.6.3 > Listening on address: 192.168.0.200:1720 Gatekeeper used: No > Gatekeeper > FastStart/H245Tunnelling/H245inSetup: OFF/OFF/OFF Supported > formats in pref. order: ALAW<0> Jitter buffer limits > (min/max): 20-100 ms TCP port range: 10000 - 20000 UDP (RAS) > port range: 10000 - 20000 UDP (RTP) port range: 10000 - 20000 > IP Type-of-Service value: 4 User input mode: 2 Max number of > inbound H.323 calls: 10 Max number of outbound H.323 calls: > 10 Max number of simultaneous H.323 calls: 10 > > > -- Executing NoOp("OH323/R2054", ""MSNetmeeting "<> - > 06000") in new stack > -- Executing Dial("OH323/R2054", > "IAX2/demo:[EMAIL PROTECTED]/6000") in new stack > -- Called demo:[EMAIL PROTECTED]/6000 > -- Call accepted by 212.130.58.212 (format ALAW) > -- Format for call is ALAW > -- IAX2[212.130.58.212:4569]/1 answered OH323/R2054 > -- Hungup 'IAX2[212.130.58.212:4569]/1' > == Spawn extension (local-h323-inbound, 06000, 2) exited > non-zero on 'OH323/R2054' > -- Hungup 'OH323/R2054' > -- H.323 call 'ip$192.168.0.65:3801/2054' cleared, reason > 4 (Cleared by remote user) > > > I think you need to revise your dialplan and incoming > context, something like this for starters... > > -- extract from extensions.conf -- > [voip-h323] > ; > ; OH323 default context from oh323.conf > ; Dial 0[number] > ; > exten => _0.,1,NoOp,${CALLERID} - ${EXTEN} > exten => _0.,2,Dial(IAX2/demo:[EMAIL PROTECTED]/${EXTEN:1}) > exten => _0.,3,Hangup() > > > -- Soren > > ----- Original Message ----- > From: "Martin Kiefer" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Friday, July 02, 2004 11:48 PM > Subject: [Asterisk-Users] H323 -> IAX > > > > Hi there > > > > I am pretty close on giving up on Asterisk :-/ > > > > I am (still) trying to make a call from a H323 phone to an Asterisk > > provider using AIX. But H323 does not route the number to > AIX. All it is > > transmitting is an "s". > > > > *CLI> -- Executing Dial("OH323/R27865", > > "IAX2/demo:[EMAIL PROTECTED]/s") in new stack > > -- Called demo:[EMAIL PROTECTED]/s > > Jul 2 23:43:55 WARNING[-1137550416]: chan_iax2.c:5231 > socket_read: Call > > rejected by 212.130.58.212: No such context/extension > > -- Hungup 'IAX2[demo]/3' > > == No one is available to answer at this time > > > > The dialed should have been 6000 both it doesn't... Anyone knows why > > not? > > > > I have installed the asterisk from cvs using openh323_1.13.5 and > > asterisk-oh323-0.6.3a. > > > > I have placed this line in my extensions.conf: > > TRUNK=IAX2/demo:[EMAIL PROTECTED] > > exten => _.,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}}) > > > > I am using the default settings in my oh323.conf. Am I > missing something > > in this file? > > > > Best regards > > Martin Kiefer > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
