On Sat, 2004-07-03 at 13:19, Thilo Salmon wrote: > On Sat, 2004-07-03 at 19:51, Kevin P. Fleming wrote: > > I would be surprised if the drivers supported more than 31 channels in a > > single span; these are just virtual PRI spans after all, so there's no > > reason for the driver to support an unlimited number of channels per span. > > I see. Then the problem really boils down to defining more than just a > single dynamic span. > > Whenever I add a second dynamic definiton to my zaptel.conf, all > channels would show up with ztcfg, but the spans would not. ztcfg would > report > > Zaptel dynamic span creation failed: File exists. > > for the 2nd virtual span. Interesting enough zttool reports channels > even for the 1st span as 'uncofigured'.
Is there a reason you aren't using IAX? TDMoE is going to put a 1.5 or 2 mbit plus over head on your LAN even when you don't have traffic whereas IAX will only burden your LAN for as much as is needed. -- Steven Critchfield <[EMAIL PROTECTED]> _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
