On Monday 05 July 2004 13:58, Paul Concepcion wrote: > In my * server I have a T100P, connected with a T1 crossover cable to an > Adtran TA750 with 2 FXO cards. After I do 'modprobe wct1xxp;ztcfg' the > alarm on the card starts blinking red. Running zttool confirmed that > yes, it is a red alarm. I've read a few previous posts on this type of > setup and I'm not too much closer. What should I be checking next? A > different cable? The config on the TA750? The TA750 has been reset to > one of the default setups. ESF framing, b8zs encoding.
First step, and *always* first step, is to plug in a loopback cable (1 -> 4, 2 -> 5) and see what happens. Loopback should always make your status LEDs glow steady green. If that's not working then you've got other problems. > span=1,0,0,esf,b8zs I'd always prefer to clock off of the channel bank; chances are its internal clock is higher stratum than anything on the T100P. :-) > On another topic, I've tried connecting to irc.freenode.net to join the > #asterisk channel. It says I need to be identified to join the channel. > pidentd is running on my machine and the firewall is set to allow stuff > on 113 through. Anyone else encounter this issue? You need to register with freenode. hop on freenode, then /msg nickserv help for instructions on how to register. bkw_ set the channel mode to require registered accounts to try and stop the spam bots from constantly disrupting the channel. -A. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
