Make sure you answer the line first. exten => 999,1,Answer exten => 999,2,MusicOnHold(default)
> -----Original Message----- > From: [EMAIL PROTECTED] [mailto:asterisk-users- > [EMAIL PROTECTED] On Behalf Of Jack Turer > Sent: Tuesday, July 06, 2004 11:43 AM > To: [EMAIL PROTECTED] > Subject: [Asterisk-Users] ztdummy running, but moh & meetme don't work > > Any thoughts on the following? > > I am running asterisk from CVS (downloaded yesterday's > version, just to be sure) on a test system with no > digium cards in it, so I have installed ztdummy (see > logs and screenshots below) as a timing source. > > When I call the music on hold extension from a Sipura > Sip connected analog phone, I hear nothing and start > getting > > Warning[98310]: chan_sip.c:674 retrans_pkt: Maximum > retries exceeded on call > [EMAIL PROTECTED] for seqno 102 > (Non-critical Response) > > As well, I set up a meetme conference, and dial it, > the first user (also a Sipura sip phone) gets 'there > are no other users on the conference..", which is OK, > then a second user comes in, but they are not > conferenced anymore. I can hang up both phones, and > dial back to the conference, but I won't even hear the > 'there are no other users message anymore'. > > usb-uhci and ztdummy are loaded fine (see lsmod), and > this system is running Redhat9 standard install with > linux sources. > > Any thoughts what might be wrong? I have already spent > the whole night googling and looking around, so I > think I covered all the basics already. > > I tried to use zaptelrtc as an alternative to ztdummy, > but it doesn't compile on redhat9 (log below as well), > so that is not an alternative either. > > Is ztdummy fairly reliable, or does it not work on > some motherboard usb chipsets? (this is a compaq > deskpro pentium 400mhz) > > Is there something I need to do with my kernel > (recompile?) so that ztdummy works, or anything else. > > (I suspect the cause is ztdummy, since both MOH and > Meetme are broken..) > > Thank you > --- > > Logs/Listings > > #service zaptel start > Loading zaptel framework: > [ OK ] > Loading zaptel hardware modules: wcusb > Running ztcfg: > [ OK ] > > #modprobe ztdummy > > -->lsmod listing > #lsmod > > Module Size Used by Not tainted > soundcore 6116 0 (autoclean) > ztdummy 2532 0 (unused) > parport_pc 17508 1 (autoclean) > lp 8580 0 (autoclean) > parport 33952 1 (autoclean) > [parport_pc lp] > iptable_filter 2316 0 (autoclean) (unused) > ip_tables 14488 1 [iptable_filter] > autofs 12148 0 (autoclean) (unused) > e100 56644 1 > wcusb 20064 0 (unused) > zaptel 179840 4 [ztdummy wcusb] > keybdev 2720 0 (unused) > mousedev 5204 0 > hid 20772 0 (unused) > input 5632 0 [keybdev mousedev > hid] > usb-uhci 24652 0 [ztdummy] > usbcore 73088 1 [wcusb hid usb-uhci] > ext3 64704 2 > jbd 47828 2 [ext3] > > -->extensions.conf (relavent part) > > ;dial 500 to join the conference (doesn't work though) > exten=>500,1,Answer > exten=>500,2,MeetMe(1234) > ... > ;dial 6000 to hear music on hold (doesn't work though) > exten => 6000,1,Answer > exten => 6000,2,MusicOnHold,default > > -->Meetme.conf > [rooms] > ; > ; Usage is conf => confno[,pin] > ; > conf => 1234 > > -->musiconhold.conf > [classes] > default => quietmp3:/var/lib/asterisk/mohmp3 > > > > > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users