I've never used an 850, but I had similar problem on the 750 when I had the channel configured wrong in the 750 console. Have you tried reseting the config and making sure everything is FXS Loopstart.
Also, have you tried another AMP-50 cable with your bank. I had a bad cable that was crossing signal with all channels. -sb -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Jeff Roberts Sent: Thursday, July 08, 2004 11:11 AM To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] odd behavior - adtran ta 850 + t100p [EMAIL PROTECTED] wrote: >I've been working with an adtran ta 850 hooked to a t100p pretty much all >day today, and I haven't gotten past configuring zaptel.conf and >zapata.conf. For some reason, when I pick up analog phone hooked up to >the first module of a quad fxs card in the second slot of the ta 850, >asterisk thinks that all four of the fxs modules in that card are going >off hook. If I pick up a phone hooked to module 2 of the same fxs card >then asterisk (correctly) only sees that module go off hook. > >When plugging a phone into any of the fxs pairs, I only get dial tone for >a second or two and then I get silence. However, I can still dial >extensions and get through. I'm not sure but maybe it is a config problem >with the ta 850, as it takes a little more manual configuration than the >ta 750 I worked with before. Anybody have any pointers? > >Here is the output on the console when I pick up a phone on module 1, and >module 2, respectively: > >[EMAIL PROTECTED]:~# asterisk -r >Asterisk CVS-HEAD-07/06/04-12:37:58, Copyright (C) 1999-2004 Digium. >Written by Mark Spencer <[EMAIL PROTECTED]> >========================================================================= >Connected to Asterisk CVS-HEAD-07/06/04-12:37:58 currently running on >slack1 (pid = 702) >- Remote UNIX connection > -- Starting simple switch on 'Zap/5-1' > -- Starting simple switch on 'Zap/6-1' > -- Starting simple switch on 'Zap/7-1' > -- Starting simple switch on 'Zap/8-1' > -- Hungup 'Zap/5-1' > -- Hungup 'Zap/6-1' > -- Hungup 'Zap/7-1' > -- Hungup 'Zap/8-1' > -- Starting simple switch on 'Zap/5-1' >Jul 6 22:30:03 WARNING[163850]: chan_zap.c:1288 zt_set_hook: zt hook >failed: Device or resource busy >Jul 6 22:30:03 WARNING[163850]: chan_zap.c:1288 zt_set_hook: zt hook >failed: Device or resource busy > -- Starting simple switch on 'Zap/6-1' > -- Starting simple switch on 'Zap/7-1' >Jul 6 22:30:03 WARNING[163850]: chan_zap.c:1288 zt_set_hook: zt hook >failed: Device or resource busy > -- Starting simple switch on 'Zap/8-1' > -- Hungup 'Zap/5-1' > -- Hungup 'Zap/6-1' > -- Hungup 'Zap/7-1' > -- Hungup 'Zap/8-1' > -- Starting simple switch on 'Zap/6-1' > -- Hungup 'Zap/6-1' > > >Here is zaptel.conf: > >span=1,0,0,esf,b8zs >loadzone = us >defaultzone=us >fxsks=1 >fxoks=5-24 > >And here is zapata.conf: > >[channels] >transfer=yes > >context=default > >language = en >usecallerid = no >hidecallerid = no >echocancel=yes >echocancelwhenbridged=yes >rxgain=0.0 >txgain=0.0 >immediate=no >signalling=fxs_ks >echotraining=yes > >group = 0 >channel => 1 > >context=trusted >group = 1 > >signalling = fxo_ks >rxwink = 300 > >channel => 5-24 > >Any help appreciated, >-Jeff >_______________________________________________ >Asterisk-Users mailing list >[EMAIL PROTECTED] >http://lists.digium.com/mailman/listinfo/asterisk-users >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > Well I tried setting up the the unused fxo ports, tried setting them to unused, and even moved the fxs cards around in the bank to see if it would make any difference. No joy though. Anybody know how to run some self tests on this bank to be sure its the problem? I'm pretty sure adtran will fix or replace the bank, but I'm sure they are going to want me to explain the problem but I'm not sure what info they'll need. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
