just one thing I forgot:
less /proc/zaptel/3
Span 3: WCFXO/0 "Wildcard X101P Board 1" RED
7 WCFXO/0/0 /proc/zaptel/3 (END)
if this may helps?
thankyou, Tomaz
Tomaz wrote:
hi,
i have two hfc isdn cards and one x100p modules are loaded in order: ----------------- insmod zaptel insmod zaphfc modes=0 insmod wcfxo ztcfg --------------------
cat /etc/zaptel.conf loadzone=nl defaultzone=nl span=1,1,3,ccs,ami bchan=1-2 dchan=3 # loadzone=nl defaultzone=nl span=2,1,3,ccs,ami bchan=4-5 dchan=6 # loadzone=nl defaultzone=nl fxsks=7
--------------------------- and in zapata.conf i have:
[channels] switchtype = euroisdn signalling = bri_cpe prilocaldialplan=national pridialplan = unknown echocancel=yes echocancelwhenbridged=yes ;echotrainig=yes overlapdial=no immediate=no group = 3 context=isdn channel => 1-2 ; switchtype = euroisdn signalling = bri_cpe prilocaldialplan=national pridialplan = unknown echocancel=yes echocancelwhenbridged=yes ;echotrainig=yes overlapdial=no immediate=no group = 3 context=isdn channel => 4-5 ; signalling=fxs_ks channel=7 ------------------------------------
so after that i load asterisk -vvvvvc and get no errors at all:
[chan_zap.so] => (Zapata Telephony w/PRI) == Parsing '/etc/asterisk/zapata.conf': Found -- Registered channel 1, PRI Signalling signalling -- Registered channel 2, PRI Signalling signalling -- Registered channel 4, PRI Signalling signalling -- Registered channel 5, PRI Signalling signalling -- Registered channel 7, FXS Kewlstart signalling == Starting D-Channel on span 1 == Starting D-Channel on span 2 == Registered channel type 'Zap' (Zapata Telephony Driver w/PRI) == Registered channel type 'Tor' (Zapata Telephony Driver w/PRI)
isdn is working ok but with channel 7 (x100p) is something wrong .. but what?
Executing Dial("SIP/1-85f5", "Zap/7/BYEXTENSION|130|t|r|f") in new stack
Jul 9 14:43:32 NOTICE[311316]: app_dial.c:559 dial_exec: Unable to create channel of type 'Zap'
== Everyone is busy at this time
thankyou! Tomaz
Robinson Tim-W10277 wrote:
Yes, me. What problems are you having?
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tomaz Sent: 09 July 2004 09:07 To: [EMAIL PROTECTED] Subject: [Asterisk-Users] bristuff - hfc card + x100p
hi!
Anyone on list has working asterisk box with hfc based card (bristuff) and a x100p adapter?
Becouse together in box I can't get it working in any way ..
thank you,
Tomaz
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
