Make sure that that the gatekeeper is turned off. these boys do both
gateways and gatekeeper...
Here is my CONF
Escape character is '^]'.
User Access Verification
Password:
3800>ena
Password:
3800#wr t
Building configuration...
Current configuration : 4796 bytes
!
version 12.3
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname 3800
!
!
clock timezone GMT 0
network-clock base-rate 56k
ip subnet-zero
!
!
!
isdn switch-type primary-dms100
isdn voice-call-failure 3
!
voice hunt user-busy
voice call send-alert
voice call convert-discpi-to-prog
voice rtp send-recv
!
voice service voip
!
!
!
voice class h323 1
h225 timeout tcp establish 3
!
!
voice class h323 2
call start fast
!
!
!
!
!
!
no voice confirmation-tone
no voice hpi capture buffer
no voice hpi capture destination
!
!
!
!
!
controller T1 1
framing esf
linecode b8zs
pri-group timeslots 1-24
translation-rule 99
Rule 1 2604 099421549
!
!
!
!
interface Tunnel1
no ip address
!
interface Ethernet0
ip address MYROUTERIP 255.255.255.192
no ip route-cache
no ip mroute-cache
!
interface Serial0
no ip address
no ip route-cache
no ip mroute-cache
shutdown
!
interface Serial1
no ip address
no ip route-cache
no ip mroute-cache
shutdown
!
interface Serial1:23
no ip address
ip mroute-cache
no logging event link-status
isdn switch-type primary-dms100
isdn incoming-voice modem 64
isdn guard-timer 3000
isdn map address .* plan unknown type unknown
isdn T203 400000
isdn T306 400000
isdn T310 400000
isdn send-alerting
isdn negotiate-bchan
isdn sending-complete
keepalive 20
no fair-queue
no cdp enable
!
interface FR-ATM20
no ip address
shutdown
!
ip classless
ip route 0.0.0.0 0.0.0.0 DEFAULTGW
no ip http server
!
!
dialer-list 1 protocol ip permit
dialer-list 1 protocol ipx permit
!
!
!
voice-port 1:23
!
!
dial-peer cor custom
!
!
!
dial-peer voice 1 pots
incoming called-number .
direct-inward-dial
!
dial-peer voice 7862 voip
destination-pattern 2604
progress_ind progress enable 8
translate-outgoing called 99
session protocol sipv2
session target ipv4:IP OF SIPSERVER
fax rate 14400
fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback cisco
no vad
!
dial-peer voice 305 pots
destination-pattern 305.......
progress_ind setup enable 3
progress_ind progress enable 8
progress_ind connect enable 8
no digit-strip
direct-inward-dial
port 1:23
!
dial-peer voice 954 pots
destination-pattern 954.......
progress_ind setup enable 3
progress_ind progress enable 8
progress_ind connect enable 8
port 1:23
prefix 954
!
dial-peer voice 561 pots
destination-pattern 561.......
progress_ind setup enable 3
progress_ind progress enable 8
progress_ind connect enable 8
port 1:23
prefix 561
!
dial-peer voice 786 pots
destination-pattern 786.......
progress_ind setup enable 3
progress_ind progress enable 8
progress_ind connect enable 8
port 1:23
prefix 786
!
dial-peer voice 18 pots
destination-pattern 18.........
progress_ind setup enable 3
progress_ind progress enable 8
progress_ind connect enable 8
port 1:23
prefix 18
!
dial-peer voice 12 pots
destination-pattern 1..........
progress_ind setup enable 3
progress_ind progress enable 8
progress_ind connect enable 8
port 1:23
prefix 1
!
dial-peer voice 411 pots
destination-pattern 411
progress_ind setup enable 3
progress_ind progress enable 8
progress_ind connect enable 8
port 1:23
prefix 411
!
dial-peer voice 911 pots
destination-pattern 911
progress_ind setup enable 3
progress_ind progress enable 8
progress_ind connect enable 8
port 1:23
prefix 911
!
dial-peer voice 11 pots
destination-pattern 011T
progress_ind setup enable 3
progress_ind progress enable 8
progress_ind connect enable 8
port 1:23
prefix 011
!
dial-peer voice 7863 voip
max-conn 2
destination-pattern 440[4-5]
progress_ind progress enable 8
session protocol sipv2
session target ipv4:IP OF SIPSERVER
codec g711ulaw
fax rate 14400
fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback cisco
no vad
!
dial-peer voice 20000 voip
destination-pattern 2[6-8][0-9][0-9]
progress_ind progress enable 8
session protocol sipv2
session target ipv4:IP OF SIPSERVER
codec g711ulaw
fax rate 14400
fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback cisco
no vad
!
gateway
!
sip-ua
nat symmetric check-media-src
retry invite 3
retry response 3
retry bye 3
retry cancel 3
timers trying 1000
sip-server ipv4:IP OF SIPSERVER
!
!
gatekeeper
shutdown
!
alias exec h sh isdn history
alias exec c sh call his voi bri | include Originate
alias exec sch sh call his voi bri
alias exec sca sh call ac voi bri
alias exec dial sh dial-peer voice sum
alias exec ca sh call ac voi bri | include Originate
alias exec ctc sh controllers t1 call-counters | inc DS0
alias exec a sh call ac voi bri
!
line con 0
line aux 0
line 2 3
flush-at-activation
line vty 0 4
login
!
!
end
On Fri, 2004-07-09 at 13:06, [EMAIL PROTECTED] wrote:
> Hi Alberto,
>
> I'm wondering if my image might be the problem - I have 12.3.9 on the
> device - released at some point in may of this year. I've got everything
> (including the kitchen sink) in terms of feature set. Can you post some of
> the relevant snippets of your config? I'd love to see how this is done.
>
> Graeme
>
>
> On Fri, 9 Jul 2004, Alberto Fernandez wrote:
>
> > I have an mc3800 working in my office with asterisk, you need the latest
> > vertion of ios. i have the image if you want it. Sip has a lot of bugs
> > on 12.2,
> >
> > I KNOW i went through hell
> >
> >
> > On Fri, 2004-07-09 at 09:20, [EMAIL PROTECTED] wrote:
> > > Hi Everyone,
> > >
> > > I've got a Cisco 3810 rig with 6 analog FXS ports, and ethernet. I'm
> > > wondering in anyone has got one of these suckers to work with asterisk in
> > > such a way that each FXS port has it's own extension.
> > >
> > > It speaks SIP, and I can send calls from asterisk out to it, but can't
> > > figure out how to get it to pass username & pw to asterisk when I try to
> > > configure it as a client. Eg -
> > >
> > > Call from a Grandstream (working)-
> > >
> > > Jul 8 20:53:57 DEBUG[229391]: chan_sip.c:3643 build_route: build_route:
> > > Contact hop: <sip:[EMAIL PROTECTED]>
> > > -- Executing NoOp("SIP/4000-98ec", "") in new stack
> > > -- Executing Goto("SIP/4000-98ec", "intern-post|4001|1") in new stack
> > > -- Goto (intern-post,4001,1)
> > > -- Executing Dial("SIP/4000-98ec", "SIP/4001|30|Ttm") in new stack
> > > Jul 8 20:53:57 DEBUG[409616]: app_dial.c:420 dial_exec: SIMPLE DIAL (NO
> > > URL)
> > > Jul 8 20:53:57 DEBUG[409616]: chan_sip.c:835 create_addr: Setting NAT on
> > > RTP to 0
> > > Jul 8 20:53:57 DEBUG[409616]: chan_sip.c:1040 sip_call: Outgoing Call for
> > > 4001
> > > Jul 8 20:53:57 DEBUG[409616]: chan_sip.c:1139 find_user: 4001 is not a
> > > local user
> > > -- Called 4001
> > > Jul 8 20:53:57 DEBUG[409616]: channel.c:1402 ast_prod: Prodding channel
> > > 'SIP/4000-98ec'
> > >
> > > Call from the Cisco (not working)
> > >
> > > Jul 8 20:54:50 DEBUG[229391]: chan_sip.c:3643 build_route: build_route:
> > > Contact hop: <sip:[EMAIL PROTECTED]:5060>
> > > -- Executing NoOp("SIP/192.168.1.9-08134bb8", "") in new stack
> > > -- Executing Goto("SIP/192.168.1.9-08134bb8", "from-sip-post|4001|1")
> > > in new stack
> > > -- Goto (from-sip-post,4001,1)
> > > Jul 8 20:54:50 WARNING[426000]: pbx.c:1802 ast_pbx_run: Channel
> > > 'SIP/192.168.1.9-08134bb8' sent into invalid extension '4001' in context
> > > 'from-sip-post', but no invalid handler
> > >
> > > BTW- Working with a ripped-off version of John Todd's configs... Anyone
> > > get this working? It's kicking my ass.
> > >
> > > Jim
> > >
> > >
> > >
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > [EMAIL PROTECTED]
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > To UNSUBSCRIBE or update options visit:
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> > >
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > [EMAIL PROTECTED]
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
> _______________________________________________
> Asterisk-Users mailing list
> [EMAIL PROTECTED]
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
