hello, I just installed 2 brand new x100p cards into my linux system. Everything compliled and worked fine from the first try. Hoewver the phone lines I will use with this system have groundstart signaling. I have tried to change the zaptel.conf and zapata.conf to use this type of signaling but ztcfg gives me an error every time with the new configuration. Bellow are the config files and the actual error. Again, everything works fine with the default signaling (fxsks)
zaptel.conf --- loadzone = us defaultzone = us fxsgs=1-2 zapata.conf --- [channels] callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes echocancel=yes echocancelwhenbridged=no rxgain=0.0 txgain=0.0 immediate=no context=default signalling=fxs_gs channel=1-2 and the error I am getting is: -- [EMAIL PROTECTED] root]# ztcfg -vvv Zaptel Configuration ====================== Channel map: Channel 01: FXS Groundstart (Default) (Slaves: 01) Channel 02: FXS Groundstart (Default) (Slaves: 02) 2 channels configured. ZT_CHANCONFIG failed on channel 1: Invalid argument (22) Did you forget that FXS interfaces are configured with FXO signalling and that FXO interfaces use FXS signalling? [EMAIL PROTECTED] root]# --- I don't know why I am getting this the only choice I have is to have the phone company change the signaling but before doing that I was thinking that maybe somebody used this signaling before and can help. thank you, gabriel _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
