Hi Paul, you would know better than I would but I always thought a T1 was 24 channels of voice with the signalling additional like we have in Australia a Pri or E1 is 30 channels voice channels plus signalling.
Can anyone else clarify? Cheers, Dean -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Paul Mahler Sent: Sunday, 11 July 2004 2:39 PM To: [EMAIL PROTECTED] Subject: RE: [Asterisk-Users] Three (quick?) questions... Hi, T1 is the carrier. T1 provides 24 "D" channels of 64Kbps each. Telephone companies provide ISDN (integrated services data network) on top of T-carrier. Two common flavors are BRI (basic rate interface) and PRI (Primary rate interface.) BRI provides two 64 kps channels, PRI provides 23 usable channels, the 24th is used for signalling. So--you can get phone calls over a T1 or over a T1 that is provisioned as a PRI. You can get 24 calls on a T1 and 23 on a PRI. A T1 has 24 channels. You can split, that is partialize, the channels between data and voice. You can do this with hardware outside the * server. Higher end Cisco routers, for example, support this. You can also use * and linux to partialize the T1. You better plan on spending a lot of time on making it work if you do it this way. You have to install the Linux packages to split the line. NON trival. Works great, though. Much less expensive, too. Paul Paul Mahler [EMAIL PROTECTED] Signate, LLC 665 Third Street Suite 100 San Francisco, CA 94107-1901 Asterisk Services and Training > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Ken D'Ambrosio > Sent: Saturday, July 10, 2004 8:33 AM > To: [EMAIL PROTECTED] > Cc: [EMAIL PROTECTED] > Subject: [Asterisk-Users] Three (quick?) questions... > > [Please excuse if this is a repeat; I initially tried to send > it from a different account, and it's been held up for a > couple of days awaiting moderation.] > > 1) What's the absolute minimum required (hardware-wise) in > order to get one > in-bound POTS line into Asterisk, and then have IP phones "inside?" > [In other words, I obviously need a NIC -- but what would be the > bare-bones telco POTS interface?] > > 2) What phones would be recommended for inexpensive (doesn't > even need LCD), > and yet functional? > > 3) In order to share data and voice over a T1, does it have to be PRI? > [I've got a T1 I could probably play with, but I'd like to be sure > it'll... well, you know: work.] > > Thanks, > > Ken D'Ambrosio > Sr. SysAdmin, > Xanoptix, Inc. > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
