|
Hi, I have a Cisco 5300 which I want to make a call THROUGH the
Asterisk PBX (security) to an IP phone which supports g729, and vice versa.
Both Cisco and the phone talk this codec if I do not force the call to go
through * However if I say canreinvite=no in the sip.conf for either
of these gadgets, the call will fail with No compatible codecs! I have bought a 5 user license just to try and fix this,
apparently it didn’t work. How can I route calls through the Asterisk as
I want to protect the Cisco gateway from being used without me knowing about it,
using a cost-effective codec such as g.723 or g.729 ? [codec_g729a.so] => (Annex A/B (floating point)
G.729/PCM16 Codec Translator) == G.729 Host-ID:
5f:a1:18:82:47:6f:a8:f7:33:4e:7d:77:e8:1d:60:15:53:ec:49:aa == Found license 'G729-700241AB' providing 5 channels == Found total of 5 G.729 licenses == Registered translator 'g729tolin' from format G729A to
SLINR, cost 2 == Registered translator 'lintog729' from format SLINR to
G729A, cost 12 *CLI> Jul 13 11:29:08 WARNING[98310]: chan_sip.c:2696
process_sdp: No compatible codecs! -- Executing Dial("SIP/67.23.212.25-0814f830",
"SIP/334|20") in new stack -- Called 334 -- SIP/334-26f8 is ringing -- Nobody picked up in 20000 ms -- Executing
VoiceMail("SIP/67.23.212.25-0814f830", "u334") in new stack -- Playing 'vm-theperson' (language 'en') == Spawn extension (default, 4084, 2) exited non-zero on
'SIP/67.23.212.25-0814f830' Appreciate your ideas. Walter. |
