Hi.
If I use a Cisco as a PSTN termination GW and need to route all incoming isdn calls to my asterisk and all outgoing calls from asterisk via the cisco out to pstn, how do I do that ? in the cisco I have this: dial-peer voice 1 pots destination-pattern [0-9]T no digit-strip direct-inward-dial port 3/0:D ! dial-peer voice 50 voip destination-pattern [0-9] voice-class codec 1 session protocol sipv2 session target sip-server no vad dtmf-relay rtp-nte ! ------- But theese to dialplans seem to interrupt each other. When an incoming call from PSTN goes through this the pattern can be matched by the first, and then be routed ot on the PSTN again, creating a loop. How do I do this in the smartest and easiest way ? /Mike _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
