I'm trying to use early-dial.
Here, all hardware PBX have it. You dial numbers and, as soon as you have a matching dialplan entry, you get throught. I my Grandstream I enabled early-dial. And when I put exten=91,1,Milliwatt in my dialplan then it works as expected. Also, when I call other SIP or IAX phones it works. Hurray! But how can I get it working with external lines? In my test setup, I have a chan_capi (0.3.4a) based setup. Now we have the nice wiki and I found, at the end of http://www.voip-info.org/tiki-index.php?page=Asterisk+CAPI+readme that I could use exten=0,1,Dial,CAPI/829545:b When I do this and dial a 0, I hear the outside dialtone. Great. But when I now dial a normal number, it doesn't work. I have to dial an additional number, say 6. After this number, I still hear a dialtone. When I now continue dialling, the dial tone vanishes (as expected). So, to reach the local number 914115, I have to dial 0-6-914115. With a hardware PBX I have to dial 0-914115 And ideas? [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 [interfaces] msn=829454 context=in-pstn incomingmsn=* controller=1 softdtmf=1 devices=2 _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
