I'm currently looking for a good solid solution that works here in the US with BRI-U NI-1 off a DMS100 or 5ESS.
bkw ----- Original Message ----- From: "Ben Bosshardt" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, July 19, 2004 11:18 PM Subject: [Asterisk-Users] Re: Re: quadbri NT_mode S-Bus Problem > >Are you using Santis Siemens ISDN NT1 ? If yes , we have the same from > >Siemens Switzerland , What I've done is to get one cable from ISDN NT > >-- > ISDN MODEM in * Machine ( HFC - S Modem Euro 30 - 40 ) and then > >used bristuff ( google for it ) , and used that , it just works! . I > >can send you my configs if you need som ehlp > > I gladly look at your config files to see what I have done wrong. At the > moment the setup is hooked up that I can make inbound and outbound calls > (from ISDN and SIP clients), just with the limitations as below : > > 1. On outbound calls, I get the normal rining call progress tone althought > the the other party has not even been reached. This then changes from normal > ringing suddenly to busy when the other party is sending a busy signal. I'd > rather have the call progress send a busy signal right away. > > 2. Internal calls between two ISDN client phones on the S-bus is not > possible. The phone rings but the call is dropped as soon as it is answered. > > Kind Regards, > Ben > > > > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
