I have a P3-800 with two IDE drives in a software RAID1 configuration. Each drive is on a separate IDE channel. Now anytime there is HD activity, I hear "beeps" and "cutting out" on a call using the X100P card.
I ran the zttest program, and discovered HD activity would drop the accuracy down to between 2% and 50%. However I noticed if I disabled one drive in the RAID1 array, zttest would always report 99.98% or higher. So one drive running works fine, but as soon as I enable the second drive, all hell breaks loose. DMA and 32-bit mode are enabled on both drives as well. I have a backup server with two Promise PCI IDE controllers in it, with 4 drives in a software RAID5 configuration, so just out of curiosity sake, I stuck a X100P card in it and tried running zttest while the RAID was re-syncing. The results were pretty bad. --- Results after 384 passes --- Best: 36.779785 -- Worst: 1.562500 Is this a poor mainboard issue, or is it actually not possible to do IDE software RAID on a machine running Asterisk with X100P cards? Is anyone currently doing it? Thanks. -- Mike Benoit <[EMAIL PROTECTED]> _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
