Thanks for your reply, Leif!
Leif Madsen wrote:
I believe so, but I'll check it again. I did see that in the docs, and I do have both inbound and outbound calls to/from the outside SIP channels working. This is where I'm baffled...it seems to me that if I can place an inbound call through the server to, say, the Zap/2 channel, and an outbound call to a SIP extension at the same time, from, say, my Zap/1 channel, then I've accomplished the basics and the server should be able to bridge two outside SIP channels (incoming SIP -> server -> outgoing SIP).This has probably been answered somewhere, but I'm stumped.
I have two Zap channels (FXS and FXO), both working fine. I can call from Zap/1 to Zap/2 and reverse.
I've also configured SIP channels, both inside and outside of my firewall. Inside can call outside, and outside can call inside. Also, both inside and outside can make and receive calls to/from Zap/1 & Zap/2.
What doesn't work, and makes no sense to me given the above, is two outside SIP channels can connect but cannot pass traffic. It would make sense to me if I couldn't already accept inbound/outbound SIP calls in some other way, but that isn't the case....
Thoughts? My sip.conf is below (edited slightly for privacy):
Might not be worth much, but I haven't seen a reply yet.
Have you forwarded port 5060 to Asterisk? Have you forwarded the port range specified in rtp.conf? By default it is 10000 -> 20000, but I change mine to 10000 -> 10005.
I'm going to be taking a network trace (ethereal is a great piece of software!) to find out *exactly* what the two outbound SIP clients are seeing/doing, but, unfortunately, I have to wait on a particular couple of people to test...
As for your [general] section, I would maybe try something like this:
[general]
port = 5060 ; Port to bind to
context=sip-extensions
externip = xxx.xxx.xxx.xxx
localnet = 192.168.1.0/24
localmask is no longer used. Not sure if there is backwords compatibility (and I'm doing this from memory, I don't have Asterisk behind NAT anymore)
I don't know, maybe it will work, maybe it won't :)
Thanks again, I appreciate your assistance!
-Mark _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
