Thanks Carlton. I made the change to rfc2833 but still have the same problems. It is really strange as soon as I try to call an extension it just says the "call is not approved". I was trying to call "100".
Interestingly I have the "sip debug" running on the server, and nothing is sent to the asterisk server. So it is almost like this is a client configuration not a server config error. Or the client is passed an ACL type of list when registering and doesn't have sufficient privileges to make a call. Geoff > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Carlton O'Riley > Sent: Tuesday, July 27, 2004 2:06 PM > To: [EMAIL PROTECTED] > Subject: Re: [Asterisk-Users] Problems connecting xlite phone > > I think you have to have the dtmfmode=rfc2833 not inband for > the x-lite > client. That is one of the major differences between your > config and mine. I > would also remove the @from-sip from the Dial command and simply put > SIP/10000 in there. Which of the available numbers are you calling? > > Geoff Nordli wrote: > > > Sip.conf > > > > [10000] > > type=friend > > context=from-sip > > username=10000 > > secret=xxxx > > callerid="10000" > > host=dynamic > > nat=yes > > canreinvite=no > > disallow=all > > allow=gsm > > allow=ulaw > > allow=alaw > > qualify=1000 > > dtmfmode=inband > > > > Extensions.conf > > > > [from-sip] > > exten => 10000,1,Dial(SIP/[EMAIL PROTECTED],20,tr) > > include => internal > > > > [dialout] > > exten => s,1,Dial(Zap/2,20,tr) > > exten => s,2,Voicemail,u1000 > > exten => s,102,Voicemail,b1000 > > > > [internal] > > exten => 2,1,Dial,Zap/2 > > exten => 100,1,Wait(1) > > exten => 100,2,Answer > > exten => 100,3,Playback(demo-congrats) > > > > > >>-----Original Message----- > >>From: [EMAIL PROTECTED] > >>[mailto:[EMAIL PROTECTED] On Behalf Of > >>Carlton O'Riley > >>Sent: Tuesday, July 27, 2004 1:41 PM > >>To: [EMAIL PROTECTED] > >>Subject: Re: [Asterisk-Users] Problems connecting xlite phone > >> > >>What extensions are available in the from-sip context? You > >>may want to post > >>your relevant information from sip.conf and extensions.conf. > >> > >>Geoff Nordli wrote: > >> > >> > >>>I am using the latest xlite phone to connect to the latest > >> > >>version of > >> > >>>asterisk (20040727). > >>> > >>>When I try to make a call the xlite phone tells me "Call > >> > >>not approved". > >> > >>>I used the configuration options that were listed on the wiki. > >>> > >>>The context in the sip.conf file is "from-sip". I have a > >> > >>matching context > >> > >>>listed in the extensions.conf file. > >>> > >>>The phone is able to register correctly. Here is a snippet > >> > >>from the "sip > >> > >>>debug" output. > >>> > >>>Sip read: > >>>SIP/2.0 200 Ok > >>>Via: SIP/2.0/UDP 192.168.x.x:5060;branch=z9hG4bK51bd9fa5 > >>>From: "asterisk" <sip:[EMAIL PROTECTED]>;tag=as6a4689e3 > >>>To: <sip:192.168.2.50>;tag=1713780919 > >>>Contact: <sip:[EMAIL PROTECTED]:5060> > >>>Call-ID: [EMAIL PROTECTED] > >>>Allow: INVITE,ACK,BYE,CANCEL,OPTIONS,NOTIFY > >>>CSeq: 102 OPTIONS > >>>Server: X-Lite release 1103m > >>>Content-Length: 0 > >>> > >>>Any reasons why I can't place a call. > >>> > >>>Thanks, > >>> > >>>Geoff > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
